Wades SnS

iTrader: (2)

I would post the 3d graph but cant figure it ou so here is the data

20 19 19 22 27 32 29 22 20 25 33 41 47 50 51 53 54 54 54 54
22 27 30 29 27 25 24 25 30 40 48 55 60 63 64 65 66 66 66 66
24 30 32 27 22 21 25 30 40 51 60 66 71 73 74 74 74 74 74 74
26 30 26 21 18 21 28 38 50 60 68 74 77 79 80 80 80 80 80 80
28 26 20 15 18 24 34 46 59 66 73 77 81 82 83 83 83 83 83 83
29 22 13 13 20 29 38 51 63 70 75 80 83 85 85 85 85 85 85 85
29 17 11 14 24 33 44 55 67 72 77 82 85 87 87 87 87 87 87 87
30 15 10 16 28 38 49 59 69 74 78 83 86 88 88 88 88 88 88 88
29 14 12 20 33 42 53 64 74 77 81 84 87 88 88 88 88 88 88 88
25 14 15 25 38 48 57 68 78 82 85 86 88 89 89 89 89 89 89 89
18 14 18 29 43 51 60 71 80 84 86 87 88 89 89 89 89 89 89 89
12 14 21 34 46 54 62 73 82 85 85 87 89 90 90 90 90 90 90 90
11 15 24 38 50 57 65 76 85 86 85 88 90 91 91 91 91 91 91 91
11 17 28 42 53 60 68 78 85 85 85 88 91 92 92 92 92 92 92 92
11 19 32 47 58 64 71 79 83 84 86 89 91 92 92 92 92 92 92 92
13 23 38 53 64 69 73 78 81 83 87 90 92 92 92 92 92 92 92 92
18 32 46 60 69 72 74 78 81 85 88 91 93 94 94 94 94 94 94 94
26 42 55 64 71 73 76 79 83 86 89 92 94 95 95 95 95 95 95 95
40 52 62 69 73 75 77 81 84 87 90 92 95 95 95 95 95 95 95 95


I am still getting lt ft of
0 -16 -16 0 0 0 0 -11 -10 -9 -8 -8 -6 -3 -1 0 0 0 0 0
0 0 0 0 0 -11 -10 -10 0 -11 -2 0 0 0 0 0 0 0 0 0
0 0 0 0 -10 -9 -8 -8 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 -13 -11 -7 -6 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 -16 -15 -13 -14 -5 -6 0 0 0 0 0 0 0 0 0 0 0 0
0 0 -14 -15 -12 -10 -4 -7 0 0 0 0 0 0 0 0 0 0 0 0
0 0 -15 -14 -12 -8 -4 -6 0 0 0 0 0 0 0 0 0 0 0 0
0 -15 -15 -12 -9 -8 -8 -9 0 0 0 0 0 0 0 0 0 0 0 0
0 -16 -15 -12 -11 -8 -8 -6 0 0 0 0 0 0 0 0 0 0 0 0
0 -15 -14 -12 -9 -8 -8 -10 0 0 0 0 0 0 0 0 0 0 0 0
0 -15 -12 -12 -10 -7 -9 -6 0 0 0 0 0 0 0 0 0 0 0 0
-14 -15 -11 -10 -6 -7 -11 0 0 0 0 0 0 0 0 0 0 0 0 0
-15 -15 -10 -9 -6 -9 -8 0 0 0 0 0 0 0 0 0 0 0 0 0
-15 -14 -8 -9 -6 -6 -7 0 0 0 0 0 0 0 0 0 0 0 0 0
-15 -13 -7 -7 -10 -5 -2 -9 0 0 0 0 0 0 0 0 0 0 0 0
-15 -14 -6 -10 -7 -3 0 -5 0 0 0 0 0 0 0 0 0 0 0 0
-16 -15 -5 -6 -7 -2 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-16 -13 -1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
and stft of
0 -8 -14 0 0 0 0 -2 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 2 4 2 0 -2 0 0 0 0 0 0 0 0 0 0
0 0 0 0 -2 1 2 4 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 -4 -3 -6 -1 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 -5 -8 1 0 0 6 0 0 0 0 0 0 0 0 0 0 0 0
0 0 -14 -10 1 0 -2 2 0 0 0 0 0 0 0 0 0 0 0 0
0 0 -13 -4 5 0 0 5 0 0 0 0 0 0 0 0 0 0 0 0
0 -8 -12 -1 5 2 8 11 0 0 0 0 0 0 0 0 0 0 0 0
0 -13 -8 1 9 4 9 7 0 0 0 0 0 0 0 0 0 0 0 0
0 -9 -3 5 10 6 11 16 0 0 0 0 0 0 0 0 0 0 0 0
0 -7 0 7 13 8 12 4 0 0 0 0 0 0 0 0 0 0 0 0
-1 -4 1 5 9 8 16 0 0 0 0 0 0 0 0 0 0 0 0 0
-6 0 2 6 9 12 9 0 0 0 0 0 0 0 0 0 0 0 0 0
-10 3 3 5 13 11 9 0 0 0 0 0 0 0 0 0 0 0 0 0
0 5 5 9 20 8 5 15 0 0 0 0 0 0 0 0 0 0 0 0
6 7 6 14 17 8 0 9 0 0 0 0 0 0 0 0 0 0 0 0
5 12 7 7 11 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 23 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0


Am I getting to low? I have notived that some of my values are at 11 and others are very close. Also should I be changing my secondary ve along with my primary? and do I hook my maf sensor back up after getting my ve tuned? I tried earlier today and I had all pos values for my ltft is this correct? If not what do I need to do to be able to use my maf again?

LoWeLL216

iTrader: (1)

What year is your engine? If its a 98-99 its running off the secondary VE table with the maf disconnected (meaning you need to change both tables)

RedHardSupra

iTrader: (1)

also, is your injector configuration proper for your hardware? that will mess with VE numbers big time

Wades SnS

iTrader: (2)

it is a 00 computer and my injectors are out of a 01 I just pretty much cut and paste all of my fueling from a stock 01 tune to my computer

TAQuickness

iTrader: (28)

for an '00 you need to be applying your changes to the back up ve table as well as the primary

Wades SnS

iTrader: (2)

so should I start over with my stock ve table? Also should I plug my maf sensor back in after tunning my ve table?

Wades SnS

iTrader: (2)

any more help on this?

RedHardSupra

iTrader: (1)

email me your bin and tell me your hardware config, and i'll tell you if you're at least going in the right direction. email is in the profile.