Big Bird WS6

iTrader: (9)

when using the bs3 what can i all get rid of under the hood?
can i delete all motor wires?
and what do i need to make my dash still work?

Frost

iTrader: (45)

Nothing, if you want your dash working you will be adding wiring in fact. You will have to keep the factory PCM installed and talking to things so that it thinks it's still running the show to some extent, and it will run your dash for you.

Jake@EPP

Speed INC sells a harness delete kit for the 99-02. Depending on what trans you are running you can either run the factory PCM for trans control or the BS3 if you purchase GM Trans.

All in all, its a easy swap, the bs3 for boost is light years ahead of the stock computer. Since you are looking into the twin fuel systems this would be a more precise way to go about doing it.

Let me know if you need anything, we are a Bigstuff tuner and dealer as well.

Frost

iTrader: (45)

How much [roughly] does that harness cost Jake? Just browsed their site real quickly but I didn't see it.

Big Bird WS6

iTrader: (9)

it is like 500 i saw it too. but i heard they are really pricy on the bs3. what is the best place to get the bs3 program?

Big Bird WS6

iTrader: (9)

jake.
pm me your best price on the bs3
thanks

Jake@EPP

We sell the entire system and any sensor needed.

If you need to spare a few bucks for the setup, i can set you up with the necessary wiring to run the stock computer to run the factory gauges. I believe the modifications are under $100 and this is for a auto car.

Jake@EPP

I do not have the 08 pricing sheet with me at the moment, give me a ring this week, id like to go over your combo/needs to figure the best setup for what your trying to do.

Jimmy P

iTrader: (177)

The Speed Inc harness is $550.