Help need to know how to lean out car!! Don't have LS1 edit
09-08-2003, 04:26 PM
#1
Launching!
Thread Starter
Join Date: Oct 2002
Location: Point Mugu, CA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Help need to know how to lean out car!! Don't have LS1 edit Well like the title says, I can't figure out how to lean out my car without LS1 edit. I have a MAF translator, but it only made the car run more rich even with it turned full lean. So I took it off. I have a SLP 85mm MAF. I am running about an 11.5 AF ratio. I have to check the dyno sheets at home to see for sure. Any help would be greatly appreciated. Also if anyone knows of a shop with LS1 edit near L.A. please let me know.
99 T/A WS-6, A4, Direct flo airlid, 85mm MAF, LS6 intake manifold, no EGR, QTP LT's, ORY pipe, Dual QTEC's, Corsa cat-back, HPP3 for shift points and firmness, MSD 8.5mm wires, NGK TR55's, Corvette ZO6 wheels 18x9.5, BFG's 265/35's.
331 rwhp/ 338 rwtq cutouts closed
332 rwhp/ 343 rwtq cutouts opened
99 T/A WS-6, A4, Direct flo airlid, 85mm MAF, LS6 intake manifold, no EGR, QTP LT's, ORY pipe, Dual QTEC's, Corsa cat-back, HPP3 for shift points and firmness, MSD 8.5mm wires, NGK TR55's, Corvette ZO6 wheels 18x9.5, BFG's 265/35's.
331 rwhp/ 338 rwtq cutouts closed
332 rwhp/ 343 rwtq cutouts opened
09-08-2003, 05:13 PM
#2
09-08-2003, 05:34 PM
#3
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,605
Likes: 0
Received 6 Likes
on
6 Posts
Re: Help need to know how to lean out car!! Don't have LS1 edit If it's already lean (+LTFT) then leaning out
further will only jack up the cruise LTFT and
lock it in at WOT, dumping more fuel, not less.
If you found a buddy with a Predator you could at
least do a little monitoring to see if this is
what's up (can't touch, but can look with someone
else's Predator).
further will only jack up the cruise LTFT and
lock it in at WOT, dumping more fuel, not less.
If you found a buddy with a Predator you could at
least do a little monitoring to see if this is
what's up (can't touch, but can look with someone
else's Predator).
09-09-2003, 12:57 PM
#6
TECH Senior Member
Re: Help need to know how to lean out car!! Don't have LS1 edit prolly the same as the SLP 85mm MAF 
(isn't the opening to the intake manifold only 80mm?)
(isn't the opening to the intake manifold only 80mm?)
09-09-2003, 03:56 PM
#7
Launching!
Thread Starter
Join Date: Oct 2002
Location: Point Mugu, CA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help need to know how to lean out car!! Don't have LS1 edit I don't know the opening to the intake manifold. Is it the same for the LS1 and LS6 intake manifold???
Trending Topics
09-09-2003, 04:05 PM
#8
TECH Resident
Join Date: Aug 2003
Location: orlando, florida
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help need to know how to lean out car!! Don't have LS1 edit the opening on the ls1 and ls6 manifold and throttle body are 75mm. according to my ls1 ls6 performance book.
09-13-2003, 09:23 PM
#10
TECH Enthusiast
iTrader: (4)
Join Date: Aug 2003
Location: Phoenix AZ
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help need to know how to lean out car!! Don't have LS1 edit you can get ls1 from carputing.com, it costs $550. i would go half and half on a 2 vin cable it costs $750, but i think you only get one cable 
