Called out by 62mm FD RX7??
My car: 2001 SS M6
MS4 Cam
LS6 stage 1 heads
Crane double rollar timing set
LS6 valley cover
QTP longtubes
TSP true duals
Vic JR intake
Nitrous outlet elbow
92mm fast TB
Fast Toys lid
SLP 85mm maf
msd 8.5
Nitto radials on 10-spoke
This is for some money so I would really like some input before I race.
With the info you gave I predict the 7 winning the roll race and the dig being more of a driver's race(still giving the wankel theadvantage). just my $.02
And I have a 4:10 gear, B&M Short shifter, and 42lb injectors.
Trending Topics
The Best V8 Stories One Small Block at Time
Thanks flash, I would say a dig run will go to whoever can get off the line better, and sence the OP has the tire advantage I would say he has the DIG advantage as well. I am interested to see if the FD willbeable to run him down.
VIDEO PLEASE
I usually had it cranked up to 17psi, goodtimes...lol And that was on 93 octane pumpgas.
But don't get me wrong, I'm not trying to take anything away from the OPs setup. It also sounds like a stout ride. It should be agood race, And I would deff like to see some good video footage.
I usually had it cranked up to 17psi, goodtimes...lol And that was on 93 octane pumpgas.
But don't get me wrong, I'm not trying to take anything away from the OPs setup. It also sounds like a stout ride. It should be agood race, And I would deff like to see some good video footage.
I didn't know that, you see I dont know to much about the rx7, I thought as on the supra a TT set up was better, but like I said I dont know a whole lot about rx7.
That guys camaro should be putting down like ~440whp in that neighborhood. How much hp do you think the RX7 will be putting down?
Also the fuel that the FD is running will make a large difference. 91 , 116, e-85, alkyinjection... you've got me curious about the RX7s mods now lol.
ProjectD - sounds like a fun car my friend.

