D Rock

iTrader: (7)

Hey guys,

I was wondering what kind of 60ft times can be cut with a stock torque arm. I have a spohn chassis mounted one but i'm trading it for a set of home ported heads so I have to go back to the stocker. The best i've cut so far with the spohn is a 1.69 so i'm wondering if that number will increase much by going to the stocker. I have ET streets BTW.

Derek

MYBLKSS

iTrader: (1)

The best I got out of my stocker is 1.70

DONAIMIAN

iTrader: (18)

I had a friend that went 1.54 in his A4. This was a heavy vert on ET drags.

gomer

iTrader: (13)

I've only been to the track once since installing the 12 bolt. I ran 4 times and all runs were in the 1.69 to 1.63 range and I'm running the stock torque arm.

1fastWS6

iTrader: (3)

1.6x's assuming you have a good tire and suspension.

QuickSilver

iTrader: (22)

Ive cut a 1.59 on the stocker. That was with ET Streets a 2,73 gear and lots of nitrous.

Josh

chpmnsws6

iTrader: (70)

buddy pulled a few 1.4's on his firehawk. ran 10.6 on bottle

D Rock

iTrader: (7)

Ok guys, looks like I won't be getting another aftermarket torque arm for a while. I'm shooting for 1.5s once I get everything done, and I have ET Streets so i'm not all that worried about traction.

Also, Stang Killer-have you been in any magazines lately?

Thanks again,

Derek

chpmnsws6

iTrader: (70)

the torque arm should be one of the last suspension pieces you get. get a poly mount for the front and u'll be good to go

WILWAXU

iTrader: (6)

Went 10.92 @ 122 (1.49) on the stock TA.

KuruptedWS6

1.69 on the stock TA