Looking for 93-02 Camaro for a magazine install.
01-21-2010, 01:38 PM
#1
Teching In
Thread Starter
Join Date: Jan 2002
Location: Orange County, CA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Looking for 93-02 Camaro for a magazine install. Hey, I wanted to check and see anybody has a 4th generation Camaro 93-02 that might be interested in allowing GTR High Performance to use their car for a tech story/project for Chevy Enthusiast Magazine. This will be a suspension build up story, so the Camaro must have a fairly stock suspension to begin with. Lowering springs are OK and performance shocks OK too. It would be a partially sponsored deal (50% off) from the manufacturers and from GTR, so they would be getting a huge savings.
Anyhow, here is a list of the items that will be installed for the story:
Adjustable panhard bar,
Strut tower brace
Rear Lower control arms
Rear lower control arm relocation brackets
Possible: may add subframe connectors to it as an option
Oh, it must be a Chevy Camaro (no Firebirds, etc...since it is a Chevy Magazine.
Anyhow, here is a list of the items that will be installed for the story:
Adjustable panhard bar,
Strut tower brace
Rear Lower control arms
Rear lower control arm relocation brackets
Possible: may add subframe connectors to it as an option
Oh, it must be a Chevy Camaro (no Firebirds, etc...since it is a Chevy Magazine.
01-21-2010, 02:20 PM
#2
A buddy posted this on our local board. I thought maybe one of you guys might be interested. Original thread is here so if you are interested let him know (or let me know and I'll tell him).
01-21-2010, 04:15 PM
#7
Teching In
Thread Starter
Join Date: Jan 2002
Location: Orange County, CA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
01-21-2010, 05:20 PM
#8
Teching In
Thread Starter
Join Date: Jan 2002
Location: Orange County, CA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
