10's NA
Thread Starter
Teching In
Joined: Jan 2015
Posts: 45
Likes: 2
From: Dillon SC
10's NA Finally took my Tick Performance built full weight camaro to the track. Car went 10.78@125 in the 1/4 and 6.87@99 in the 1/8. Car probably weights 3750-3850 with me in it. Guess its time to start pulling weight out of it and start on suspension and rearend.
Thread Starter
Teching In
Joined: Jan 2015
Posts: 45
Likes: 2
From: Dillon SC
Tick Performance built 408 with cnc LS3 heads with 11.5-11.7 compression, BTR valvesprings, custom grind Cam Motion cam by Martin Smallwood of Smallwood Race Developments. Ported ls3 intake from BER. Kooks 1 7/8 race headers to TSP true duals. Yank SS4000 stall converter. Rebuilt 4l60e and factory 3.23 rearend for now.
Thread Starter
Teching In
Joined: Jan 2015
Posts: 45
Likes: 2
From: Dillon SC
1.50 60' and I'm not sure what the da was... It was in the 50's as far as temperature but there was a good bit of moisture in the air and elevation is probably 75-100 feet above sea level.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
