Bolt on 02 sweeked in 12s
#21
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
I haven't ran it at the track yet with the SS4000 yet only driving it on the street with 273s its takes longer getting used to, I have a set of 373s going in asap. I'm waiting on getting a tune after i install my 373s. I've never heard you needed 410s going that big of a TQ converter.
#22
12 Second Club
iTrader: (3)
Join Date: Mar 2010
Location: Guthrie,Oklahoma
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Yea idk, I was talking to revmax a little ways back about getting one for my old car and they said I would need 373's (sorry)to run a 4000... Idk. But even so your good either way haha
#23
Dude there is nothing wrong with that time for that MPH. LOL I have went 12.80s@111 with a 2.1 60ft. Keep on working your stuff. Did you replace the rear with a new 9 inch or did you keep the stock one.
#25
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Ok cool I like to see my stall pick me up a second in the 1/8th if my rear holds up.
#26
TECH Fanatic
iTrader: (4)
Join Date: Apr 2005
Location: Shelby twp, MI
Posts: 1,514
Likes: 0
Received 0 Likes
on
0 Posts
Your right on par with where you should be.
Ive been 7.7's with your exact same mods. 4K stall, 3.73's ect. And less weight reduction to boot!
Get that gear installed, tuned, and back to the track on some stickies!
Sorry but your dreaming if you think adding a converter and a gear is going to net you a second in the 1/8th when you already going 8.30's. I would expect to run 7.9x-7.8x with a 1.6x 60' and be very happy if it went 7.70's
Ive been 7.7's with your exact same mods. 4K stall, 3.73's ect. And less weight reduction to boot!
Get that gear installed, tuned, and back to the track on some stickies!
Sorry but your dreaming if you think adding a converter and a gear is going to net you a second in the 1/8th when you already going 8.30's. I would expect to run 7.9x-7.8x with a 1.6x 60' and be very happy if it went 7.70's
Last edited by c0ncEpT; 08-22-2012 at 09:53 PM.
#27
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Your right on par with where you should be.
Ive been 7.7's with your exact same mods. 4K stall, 3.73's ect. And less weight reduction to boot!
Get that gear installed, tuned, and back to the track on some stickies!
Sorry but your dreaming if you think adding a converter and a gear is going to net you a second in the 1/8th when you already going 8.30's. I would expect to run 7.9x-7.8x with a 1.6x 60' and be very happy if it went 7.70's
Ive been 7.7's with your exact same mods. 4K stall, 3.73's ect. And less weight reduction to boot!
Get that gear installed, tuned, and back to the track on some stickies!
Sorry but your dreaming if you think adding a converter and a gear is going to net you a second in the 1/8th when you already going 8.30's. I would expect to run 7.9x-7.8x with a 1.6x 60' and be very happy if it went 7.70's
Ya I'm gonna do more weight reduction when I take it to the track.Skinny's Wide's I might take out my front and rear bumper supports. I have been a best of a 1.96 60ft with stock stall/273 gears and stock wheels and 245 street radials. I was hoping for 1.5 60ft but I will be happy with 1.6s. My buddy went 1.75 60ft and went 7.8s@89-90mph.
#28
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
I've got my car tuned with hp tuners.I still have the hiccup shifting something around 2500-3000 rpms.If anyone on here knows what to adjust/delete.. Thanks Jimmy.
#29
12 Second Club
iTrader: (3)
Join Date: Mar 2010
Location: Guthrie,Oklahoma
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
I forgot about this thread and that is a crazy good 60 foot for a stock *** tire. Does the track you go to have really good prep? And as for your problem do you mean it shifts at 2500-3000 at wot or just cruising it hiccups in that area? Either way that is strange and hope you can figure it out. I wonder if maybe it has something to do with the trans like the solenoid is getting anncy
#30
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
I forgot about this thread and that is a crazy good 60 foot for a stock *** tire. Does the track you go to have really good prep? And as for your problem do you mean it shifts at 2500-3000 at wot or just cruising it hiccups in that area? Either way that is strange and hope you can figure it out. I wonder if maybe it has something to do with the trans like the solenoid is getting anncy
#32
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
I went to MIR today and I won the 2nd chance bracket class. I got a 11s time slip. Here is what it looks like and can I be put in the 11s club.I had a great time today.I'm happy what it ran
R/T-.229
60ft-1.615
330ft-4.814
1/8th-7.532
MPH-89.98
1000-9.913
1/4-11.932
MPH-111.82
R/T-.229
60ft-1.615
330ft-4.814
1/8th-7.532
MPH-89.98
1000-9.913
1/4-11.932
MPH-111.82
#35
12 Second Club
iTrader: (3)
Join Date: Mar 2010
Location: Guthrie,Oklahoma
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
I'm thinking a ptc 4k maybe a little more not sure. I need to snag some dr's to see if that is why my gears aren't helping me out. I mean a 12.9 with 4.11's is depressing haha. But the tracks around here will be closed by the time I get my tc and tune so ill have to wait all winter wondering
#36
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Jul 2006
Location: Fredericksburg,Va
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
I'm thinking a ptc 4k maybe a little more not sure. I need to snag some dr's to see if that is why my gears aren't helping me out. I mean a 12.9 with 4.11's is depressing haha. But the tracks around here will be closed by the time I get my tc and tune so ill have to wait all winter wondering
#40
12 Second Club
iTrader: (3)
Join Date: Mar 2010
Location: Guthrie,Oklahoma
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Damn that's a good gain on nittos... I have some nt05's non radials but love them but have heard there not the best out there. But im getting a 3600 from a buddy for a steal and it already has a antiballoning plate so ill just have it restalled when im ready to do my heads and cam. Hope it works out good, but everyone tells me I need to go with a 4k