Cam Only Dyno Thread
#1
TECH Apprentice
Thread Starter
iTrader: (3)
Join Date: Oct 2003
Location: Woodstock, GA
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Cam Only Dyno Thread
OK guys heres the deal, I want to see as many cam only cars post dyno results. List mods such as LT's, LS6 intake, gears, stall, auto or M6. Mention drivability, power band, etc. Hopefully this will help people to choose a cam right for them.
Thanks
Thanks
#2
Launching!
Join Date: Nov 2001
Location: North Royalton, Ohio
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
2000 Camaro SS
CompCams 224/224 .563/.563 112 cam, CC 918 springs, CC pushrods
Pacesetter longtubes, ORY, SLP catback
LS6 intake, ASP pulley
M6 trans/ McLeod clutch
STOCK TUNING
Driveability is good, no stalling, nice noticable lope.
386 HP/ 369 torque
CompCams 224/224 .563/.563 112 cam, CC 918 springs, CC pushrods
Pacesetter longtubes, ORY, SLP catback
LS6 intake, ASP pulley
M6 trans/ McLeod clutch
STOCK TUNING
Driveability is good, no stalling, nice noticable lope.
386 HP/ 369 torque
#4
TECH Resident
iTrader: (2)
Join Date: May 2002
Location: Wish-consin
Posts: 756
Likes: 0
Received 0 Likes
on
0 Posts
See sig for power and mods.
Idles and drives like stock. I'm an old guy, I mean stock. Starts pulling at 3K and doesn't stop until 6.2K. I love my TR220. Torque curve is pancake flat 360 - 369 rwtq from 3000 to 5500.
I can break my rear tires (BFG 275 Comp T/A KD's) loose at 50 mph in second gear by just mashing the gas pedal. I smile every time I do that.
Idles and drives like stock. I'm an old guy, I mean stock. Starts pulling at 3K and doesn't stop until 6.2K. I love my TR220. Torque curve is pancake flat 360 - 369 rwtq from 3000 to 5500.
I can break my rear tires (BFG 275 Comp T/A KD's) loose at 50 mph in second gear by just mashing the gas pedal. I smile every time I do that.
#5
TECH Enthusiast
iTrader: (3)
Join Date: Oct 2003
Location: Holly Springs, NC
Posts: 586
Likes: 0
Received 0 Likes
on
0 Posts
see sig. Look under my webshots page and look at the dynograph page.
Blue: G5X2 (also current cam) dynoed in 90+ degree humid weather.
Red: FM13
Green: TR224
all cams on 112 lsa
Blue: G5X2 (also current cam) dynoed in 90+ degree humid weather.
Red: FM13
Green: TR224
all cams on 112 lsa
Trending Topics
#8
TECH Fanatic
iTrader: (3)
Join Date: May 2003
Location: Lake Anna, VA/ Fairmont, WV
Posts: 1,795
Likes: 0
Received 0 Likes
on
0 Posts
When I was cam only I made 399rwhp @ 386rwtq with my TR224 on stock 241 heads.
Mods were, Lid, ASP, Ported TB, 85mm LS6 MAF, TR224, Yella Terra's, Longtubes, ORY, QTEC @ a Rapid Motorsports Dyno Tune. Driveability of the TR224 112LSA after tuning is one word.............Awesome! Very civil @ street friendly. Dyno graph will speak for powerband...
Mods were, Lid, ASP, Ported TB, 85mm LS6 MAF, TR224, Yella Terra's, Longtubes, ORY, QTEC @ a Rapid Motorsports Dyno Tune. Driveability of the TR224 112LSA after tuning is one word.............Awesome! Very civil @ street friendly. Dyno graph will speak for powerband...
#9
2000 Camaro SS
Auto
Yank ST3500
Stock gears
Lid
SSRA
LS6 Intake
ASP Crank Pulley
Jet Hot LT's w/ ORP
Stock Cat-back w/ Cutout
Comp XER 226/232 .588/.596 114
(...)-This much Tuning.
388rwhp @ 6400 RPMs
369rwtq @ 4000 RPMs
Auto
Yank ST3500
Stock gears
Lid
SSRA
LS6 Intake
ASP Crank Pulley
Jet Hot LT's w/ ORP
Stock Cat-back w/ Cutout
Comp XER 226/232 .588/.596 114
(...)-This much Tuning.
388rwhp @ 6400 RPMs
369rwtq @ 4000 RPMs
#11
Just got a TR 230/224 installed and it made 403HP and 387TQ in an '01 Z06. Dynatech LT's and X-pipe, Borla Stinger, and Donaldson Blackwing.
Idles smooth at 900, up to 1000 with the A/C on. No drivability isses so far. Ever so slight shake to the car from time to time, but not a whole lot more than stock. With the new clutch I haven't been able to hit WOT yet, but I have another 300 miles then hang on!
Idles smooth at 900, up to 1000 with the A/C on. No drivability isses so far. Ever so slight shake to the car from time to time, but not a whole lot more than stock. With the new clutch I haven't been able to hit WOT yet, but I have another 300 miles then hang on!
#12
11 Second Club
Join Date: Nov 2001
Location: Cave Springs, GA
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
ToddAlmighty,
Was that unlocked or locked? Nice numbers. Just curious b/c I have the same converter.
Anyway, Mods are:
Comp .230/.232 .591/.595 112+2
LS6 intake
whisper lid
ported MAF
ASP pulley
MAC midlengthes with ORYP
Borla catback
ST3500
Moser 12 bolt w/3.42s
365 rwhp unlocked.
Was that unlocked or locked? Nice numbers. Just curious b/c I have the same converter.
Anyway, Mods are:
Comp .230/.232 .591/.595 112+2
LS6 intake
whisper lid
ported MAF
ASP pulley
MAC midlengthes with ORYP
Borla catback
ST3500
Moser 12 bolt w/3.42s
365 rwhp unlocked.
#13
Originally Posted by EvilLS1
ToddAlmighty,
Was that unlocked or locked? Nice numbers. Just curious b/c I have the same converter.
Anyway, Mods are:
Comp .230/.232 .591/.595 112+2
LS6 intake
whisper lid
ported MAF
ASP pulley
MAC midlengthes with ORYP
Borla catback
ST3500
Moser 12 bolt w/3.42s
365 rwhp unlocked.
Was that unlocked or locked? Nice numbers. Just curious b/c I have the same converter.
Anyway, Mods are:
Comp .230/.232 .591/.595 112+2
LS6 intake
whisper lid
ported MAF
ASP pulley
MAC midlengthes with ORYP
Borla catback
ST3500
Moser 12 bolt w/3.42s
365 rwhp unlocked.
#17
TECH Apprentice
Thread Starter
iTrader: (3)
Join Date: Oct 2003
Location: Woodstock, GA
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TTPMatt
M6 Cam Only
Stock LS1 Motor (Stock LS1 Heads)
TTP Equalizer V.2 Camshaft
ASP UD Pulley
10-Bolt 3.42s
Stock LS1 Motor (Stock LS1 Heads)
TTP Equalizer V.2 Camshaft
ASP UD Pulley
10-Bolt 3.42s