Ryan K

iTrader: (11)

Ok, I did a search, and could not find any pictures of front & rear calipers ground down for fit drag rims. Please show'em off if ya got them! And if you could include the type of wheels and wether or not you are running spacers. Remember this is for pictures.

ProStockJohn feel free to show them bad boys off! You too Tony.

I just got a set of Centerline Auto drags for the car and boy do they take alot of grinding! <img src="gr_eek2.gif" border="0">
Thanks,
Ryan Karasek


[ January 30, 2002: Message edited by: Ryan Karasek ]</p>

Sears

http://jsears8.cz28.com/prostars/grinding

That's whats required to run a 15x8 prostar with 5.5" backspacing and a 5/16" spacer over the rear calipers. What I did is put grease on the inside of the wheel, torque it down, spin it a couple of times, and see where it left grease on the caliper. Grind on those spots until no more grease gets on the calipers.

Justin

mmiller

iTrader: (1)

Justin, any way to see your pics without having to sign up for Z28.com?

Big Mike

iTrader: (4)

I'll post some pics this afternoon.

Nine Ball

iTrader: (38)

Now now, you should know better that to post the exact same topic in two different forums <img src="gr_grin.gif" border="0">

Here is the OTHER exactly the same thread, with my pictures:

Ground Caliper Pictures

Tony

Ryan K

iTrader: (11)

Ya, I know.. Thanks Tony.

ANBODY ELSE?

Ryan <img src="gr_images/icons/cool.gif" border="0">

[ January 30, 2002: Message edited by: Ryan Karasek ]</p>

Pro Stock John

iTrader: (34)

I think Fireball has pics.

Ryan K

iTrader: (11)

Also, have you seen how wide the center is on the Auto-Drags? Its over 1.25" thick! <img src="images/icons/confused.gif" border="0">

Ryan

Big Mike

iTrader: (4)

You have mail Ryan!