Just a Thought...
Thread Starter
Joined: Sep 2005
Posts: 1,930
Likes: 0
From: Eagle Pass, TX
Just a Thought... I just had my camaro painted last month and I'd like to have a "future mod" should I get into a fender bender.
I hope this doesn't happen but if it does, I'd fill in the emblem's indention and smooth the middle line of the front bumper to match my hood.
What do ya'll think of this crude paint sketch?
AS IT IS:
CRUDE PAINT SKETCH:
I hope this doesn't happen but if it does, I'd fill in the emblem's indention and smooth the middle line of the front bumper to match my hood.
What do ya'll think of this crude paint sketch?
AS IT IS:
CRUDE PAINT SKETCH:
Last edited by PERFECT Z28; Nov 20, 2008 at 01:47 PM. Reason: Added picture of C6 Z06
Thread Starter
Joined: Sep 2005
Posts: 1,930
Likes: 0
From: Eagle Pass, TX
^ The scoop/vent opening would be in the bumper not the hood.
Again, these are just ideas.
I saw this stripe on another thread.
What about this Flat Black Stripe:
with pin stripe outline
w/o pin stripe outline
Again, these are just ideas.
I saw this stripe on another thread.
What about this Flat Black Stripe:
with pin stripe outline
w/o pin stripe outline
Last edited by PERFECT Z28; Nov 20, 2008 at 08:06 PM. Reason: added pics
I like the idea of a scoop in the bumper (similar to the Z06s)!!
As far as the stripe, you are looking at something similar or spot-on to this:
https://ls1tech.com/forums/appearanc...-new-pics.html
As far as the stripe, you are looking at something similar or spot-on to this:
https://ls1tech.com/forums/appearanc...-new-pics.html
I like the idea of a scoop in the bumper (similar to the Z06s)!!
As far as the stripe, you are looking at something similar or spot-on to this:
https://ls1tech.com/forums/appearanc...-new-pics.html
As far as the stripe, you are looking at something similar or spot-on to this:
https://ls1tech.com/forums/appearanc...-new-pics.html
You have got to fix the fitment of the headlights. The weather stripping is supposed to be on the inside, not sticking out like that...
Trending Topics
Thread Starter
Joined: Sep 2005
Posts: 1,930
Likes: 0
From: Eagle Pass, TX
These cheap ebay headlights require more adjustment than I have had time to spend on them.
I don't drive the car too much anymore and I don't have a lot of free time.
I'm gonna take the headlights out, take off the stripping, remove the adhesive, install the headlights, mark the area where the stripping needs to be, remove the headlights, then apply adhesive to the stripping and line it up to the markings I've made, install them once again and align the light ouput once again.
Am I missing anything?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
