New and improved SWITCHPLATES - Now with better switches!
#1
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
New and improved SWITCHPLATES - Now with better switches!
Okay, a lot of people want cutout switches in their switch panels, and I can now offer that. I can also offer every switch in a rocker switch so that everything looks uniform and there is no purge switch that looks out of place.
What's new here:
3 position rocker switches - On / Off / On (not a 3 position momentary. You will have to flip it to either "on" position and then back to neutral yourself. It will not go neutral by itself)
-seen on the opener and cutout
momentary rocker switch instead of a push button momentary
-seen on the purge
The end result is a panel that looks more professional, and keeps the switches at an extremely low profile. By the way, the ashtray lid still closes without interference.
M6 guys, I am going to finish up the plate for your ashtrays within the next couple of weeks. Keep your spirits up . The downside is that labeling will not be able to be backlit properly due to clearance issues, but I can color labels as seen in these photos.
Here we go:
A4 and M6 cubby hole plate (for use with cars without traction control):
A4 ashtray plate
These will be coming for 1999-present Mustangs, and 04-06 GTOs as well, so tell your friends to stay on the lookout.
Estimated pricing: $44.00 for any plate with 2 switches. Each additional switch will cost $4.00. This includes labeling and coloring.
These are available now!!!
A4 ashtray plate:
http://www.emblempros.com/inc/sdetail/931
Cubby hole plate:
http://www.emblempros.com/inc/sdetail/961
Thanks.
What's new here:
3 position rocker switches - On / Off / On (not a 3 position momentary. You will have to flip it to either "on" position and then back to neutral yourself. It will not go neutral by itself)
-seen on the opener and cutout
momentary rocker switch instead of a push button momentary
-seen on the purge
The end result is a panel that looks more professional, and keeps the switches at an extremely low profile. By the way, the ashtray lid still closes without interference.
M6 guys, I am going to finish up the plate for your ashtrays within the next couple of weeks. Keep your spirits up . The downside is that labeling will not be able to be backlit properly due to clearance issues, but I can color labels as seen in these photos.
Here we go:
A4 and M6 cubby hole plate (for use with cars without traction control):
A4 ashtray plate
These will be coming for 1999-present Mustangs, and 04-06 GTOs as well, so tell your friends to stay on the lookout.
Estimated pricing: $44.00 for any plate with 2 switches. Each additional switch will cost $4.00. This includes labeling and coloring.
These are available now!!!
A4 ashtray plate:
http://www.emblempros.com/inc/sdetail/931
Cubby hole plate:
http://www.emblempros.com/inc/sdetail/961
Thanks.
Last edited by dragonZ28; 02-07-2009 at 10:59 PM.
Trending Topics
#8
these look very nice, gives me a reason to put in an ls1 console.
question: do I need to replace the entire dash system to utilize the "cubby hole" section on the console? I don't like the giant cassette holder in the 93-96 console, and these look much more aesthetically pleasing/modern.
question: do I need to replace the entire dash system to utilize the "cubby hole" section on the console? I don't like the giant cassette holder in the 93-96 console, and these look much more aesthetically pleasing/modern.
#10
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
These are available now!!!
A4 ashtray plate:
http://www.emblempros.com/inc/sdetail/931
Cubby hole plate:
http://www.emblempros.com/inc/sdetail/961
A4 ashtray plate:
http://www.emblempros.com/inc/sdetail/931
Cubby hole plate:
http://www.emblempros.com/inc/sdetail/961
#12
Banned
iTrader: (56)
I just sealed my fate with a gauge plate there or I would have been all over it. I'm still highly considering the M6 console (with my A4) to use with your switch plate in the ashtray...
Definitely looking forward to the GTO stuff as I need it for the wife's car. Are you making a panel for them where the cupholders go or for the areas (made for switch plates actually) behind the window switches?
#13
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
I just sealed my fate with a gauge plate there or I would have been all over it. I'm still highly considering the M6 console (with my A4) to use with your switch plate in the ashtray...
Definitely looking forward to the GTO stuff as I need it for the wife's car. Are you making a panel for them where the cupholders go or for the areas (made for switch plates actually) behind the window switches?
As for the M6 plate, it will be made in a matter of a week or two - I'm forcing it to happen.
#17
Kleeborp the Moderator™
iTrader: (11)
And for reference, this is what I'm talking about (granted, I know it isn't exactly quite as big as the rockers):
http://www.nitrousoutlet.com/catalog...del=94&dept=11
http://www.nitrousoutlet.com/catalog...del=94&dept=11