Dick Harrell Front Bumper Project (tons of pics)
Make a good plug and we can have it reproduced within a few weeks Of course, we'd need the community to step up and to 10 pre-orders but that should be a problem with the way this thing is looking
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Looks great man! Keep up the good work.
I'm glad you are using that bumper as a mold. As said before, fiberglass/bondo on urethane doesn't work and say looking good.
I'd be really cool to see these bumpers produced in urethane! Thats the biggest challenge right there to get done. Its not hard to make the bumper mold like you are doing. Anyone with some knowhow like myself could reasonably do that. I'm not knocking you at all. I commend you for your efforts. This could actually happen now that we have a connection to making molds with urethane.
What i'm getting at is, it's a wonder why this hasn't been done sooner! Their's a nice demand for the widebody stuff.
I'm glad you are using that bumper as a mold. As said before, fiberglass/bondo on urethane doesn't work and say looking good.
I'd be really cool to see these bumpers produced in urethane! Thats the biggest challenge right there to get done. Its not hard to make the bumper mold like you are doing. Anyone with some knowhow like myself could reasonably do that. I'm not knocking you at all. I commend you for your efforts. This could actually happen now that we have a connection to making molds with urethane.
What i'm getting at is, it's a wonder why this hasn't been done sooner! Their's a nice demand for the widebody stuff.
The bumper is looking amazing! I wouldn't mind havin one for myself! So you plan on using the 6LE bumper and pushing it back like on the car you posted? If so that is going to be awesome and I cannot wait to see it!
update update update! Only spent a few hours sanding tonight. Wasn't really feeling well to begin with and then inhaling about a pound of bondo dust I decided to call it a night 
The general shape is really coming in nicely.
The hardest part of this project, believe it or not, is the bottom half. Simply because I can't find any pictures of the bottom of a dh bumper But I have some ideas 
and the best tool ever for those hard to reach round spots....
This weekend:
More bondo, fill in all the low spots, and probably spend the majority of my time checking dimensions and measuring to make this thing perfect.
The general shape is really coming in nicely.
The hardest part of this project, believe it or not, is the bottom half. Simply because I can't find any pictures of the bottom of a dh bumper
But I have some ideas and the best tool ever for those hard to reach round spots....
This weekend:
More bondo, fill in all the low spots, and probably spend the majority of my time checking dimensions and measuring to make this thing perfect.