Here we go - the Muffinbuster countdown - new pics daily
04-18-2009, 09:57 AM
#982
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
I've got to tell you guys. I'm feelin the love that this will happen this week.
For one thing it's overdue by three weeks at this point, and they have had everything they needed from us for at least 7 weeks now.
We are getiing emails, and having phone conversations at closer intervals.
I actually got one email from our main guy, that said this was ready to go out anyday. That was on Wednesday.
We will announce our opening day right here in this thread, we just have to keep a good thing going.
We might have to throw a party.
04-18-2009, 12:47 PM
#985
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
I have just installed the Z28 ZR1 emblem on my Z28. This emblem is in the exact same stock location of the SS and Z28 OEM emblems seen here:
And here is ours installed:
We had no problems whatsoever putting this in this location. I think you could even go another 1/2" to the right if you wanted to, but it is in the stock location where it sits.
So, there you finally have it - it works and it has 100% full-contact.
And here is ours installed:
We had no problems whatsoever putting this in this location. I think you could even go another 1/2" to the right if you wanted to, but it is in the stock location where it sits.
So, there you finally have it - it works and it has 100% full-contact.
Last edited by dragonZ28; 04-18-2009 at 08:38 PM.
04-18-2009, 01:08 PM
#987
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
Kevin,
We already replied about your new pieces. We need some options to what you are asking for. We have approached SLP about doing their logos, and even though they said they would let us do them, they still have not agreed. Please check you email inbox.
Thanks, Roger
We already replied about your new pieces. We need some options to what you are asking for. We have approached SLP about doing their logos, and even though they said they would let us do them, they still have not agreed. Please check you email inbox.
Thanks, Roger
04-18-2009, 01:14 PM
#989
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
Yesterday we were only holding them up to the car by hand. This is not a true installation test. On the actual install, there are absolutely no issues. As you can clearly see!!
Thanks,
I just might give up my 2nd gen emblems 
04-18-2009, 02:23 PM
#992
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
We can make these in any size you would like, but we have to have a standard to sell them by. Adjustments can be custom made for individual applications.
04-18-2009, 06:45 PM
#993
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
Whipped these up tonight and they'll be on the site soon...
These are ZR1 emblems as well, but they are pretty flexible. They are made from 2-layer plastics with acrylic inserts. All colors can pretty much be done custom. These have no backing piece like the stainless emblem, and the plastic is flexible, so it will wrap around some curves more than the stainless piece.
BLUE ON WHITE
RED ON BLACK
These are ZR1 emblems as well, but they are pretty flexible. They are made from 2-layer plastics with acrylic inserts. All colors can pretty much be done custom. These have no backing piece like the stainless emblem, and the plastic is flexible, so it will wrap around some curves more than the stainless piece.
BLUE ON WHITE
RED ON BLACK
04-18-2009, 08:32 PM
#996
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
We can get that red in a number of shades. This particular one is a brigter red, just bad lighting in the picture.
We had a different item in mind for today, but spent the day working on a flexible ZR1 style emblem. But, we wanted it to retain the style of the stainless piece.
This is what we came up with. It is very flexible and comes in about 20 different color combinations. We can also make the filled center bowties out of this, as well as the letter set fill ins, with the different color borders.
If someone wanted an entire set of emblems made for the car to match, this would be the material to do it with.
We will get back to the other items tomorrow.
We had a different item in mind for today, but spent the day working on a flexible ZR1 style emblem. But, we wanted it to retain the style of the stainless piece.
This is what we came up with. It is very flexible and comes in about 20 different color combinations. We can also make the filled center bowties out of this, as well as the letter set fill ins, with the different color borders.
If someone wanted an entire set of emblems made for the car to match, this would be the material to do it with.
We will get back to the other items tomorrow.
Last edited by dragonZ28; 04-20-2009 at 06:30 AM.
04-18-2009, 09:32 PM
#998
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
We do not have them publicly for sale yet. Waiting for the licensing to start still. This week is extremly likely for that to happen. They have been approved for us to make.
I am collecting a list of customers names who want to be notified right away, when we are good to go. If you want to be placed on this list, please email me with the items you are interested in.
Thanks, Roger
04-18-2009, 10:52 PM
#1000
FormerVendor
Thread Starter
iTrader: (32)
Join Date: Jul 2003
Location: Lexington, KY
Posts: 3,654
Likes: 0
Received 0 Likes
on
0 Posts
I need to double check on the cost.
Thanks,