TORCHD 02 TA

iTrader: (39)

I am looking buying some gauges, the company allows you to personalize them. I am havin trouble deciding if i want a black background with red numbers? OR a silver background with red numbers?

Here are how my gauges look in my car now...... Those are McEwen Silver face gauges

Also the bezel piece that goes around the gauges, should i do it in black to math the pod or chrome?

One more thing. I can chose the color of the needle too. Would have it glow red or blue?

98 WS6

iTrader: (20)

I would do a black bezel, probably red needle.. and im not sure about the gauges. Black would probably look weird and might be hard to see at times.

I call dibs on the old gauges

TORCHD 02 TA

iTrader: (39)

Hey Brian, i gues i mislead you. I am talking about Gauges for water temp, fuel pressure and so on.. For the A pillar like you have with your cobalts...

Danny2tek

iTrader: (1)

Damn I thought you were talking about the dash gauges too!, for pillar gauges I think you should keep the same color scheme going.

TORCHD 02 TA

iTrader: (39)

any suggestions?

nitroussharks

iTrader: (244)

i think with your setup, silverface with black pod and red needle would look good

Spd-Kilz

iTrader: (35)

Not sure what color background I'd go with, but definitely go with a red needle!

TORCHD 02 TA

iTrader: (39)

Adam you got a PM. i would post the link but they are not a sponsor here.

Gimme some feedback please

TORCHD 02 TA

iTrader: (39)

I jsut wish with the silver background, the numbers were black and not red...

With the needle option you can get a red needle (during the day it is red and night it is red too).. Or you can get a white needle (during the day it is white) and at night it glows red..

OR

you can get a blue needle. During the day it is white, and at night it glows blue like the cobalt blue...

I can not decide

LS1Transhed

Hm... black background.... red numbers... white needle (glows red at night). I think that would look really good during the day and at night. Id say keep the bezel black around the pods.

TORCHD 02 TA

iTrader: (39)

The only thing i do not like, is when you light the gauge up, there is no difference between day and night.. Get what i am saying?

JScamaro

iTrader: (6)

Here is what mine looks like. I was going for a stock appearance though. I had the pillar painted to match the dash perfectly. You could do white face gauges of course since your already using white faced on the dash.

TORCHD 02 TA

iTrader: (39)

what pillar is that? With the autometer pillar match my ebony dash?

JScamaro

iTrader: (6)

That is the autometer pillar. I wasn't there when LMR installed it for me so I'm not sure how it matches straight from autometer.

LS1Transhed

Well wouldnt the needles be white during the day and red at night?

TORCHD 02 TA

iTrader: (39)

Yes you are correct..

But during the day and night the black background and red numbers.. There is no transition

LS1Transhed

U make a valid point lol. Perhaps Amys type of gauges? I think they're similair to the ones JScamaro posted on his A Pillar.

Detoxx03

iTrader: (14)

Send me the link so I can see what they offer and i'll get back to ya.

TORCHD 02 TA

iTrader: (39)

Here is what i did

I got me a W/B, Fuel Pressure and Water Temp gauge

Silver background, Black Numbers, red needle.

During the day it will be jsut that. silver background, black numbers and red needle

and at night the silver will glow RED and the numbers will still be black with a red needle

Should look good