When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just a lot of measuring. I had to buy some US Version Headlights and use that to measure where the headlights were going to since the US Headlights are different and smaller than the EURO type lights. I used a Dremel with a metal cutting wheel and a saw saw. Had to make my own wire harness to make the new lights work with my factory setup. Had to cut the bumper in order for the headlights to sit right in and flush with the bumper. Still not done yet. I still need to fab something up to keep those lights bolted down.
so i also have bought the bmw headlights except mine came with the blue tint halos. one problem. i followed your schematics accept after halfway making my own harness i realized i have 2 wires per headlight (2 for high and 2 for low beams) and one extra gray one off to the side. your schematics show 3 wires per light bulb. i have bought 2 relays along with the wiring. so red and black wires i assume still goes, minus the blue wire in your schematic? how to wire that up, if you dont mind answering?. i have a 1983 z28. i noticed on my bmw lights the halos are wired in with the low beams. so would i need to unplug them and plug into my running lights or? its a weird set up. got these lights also from DEPO. heres the link. http://cgi.ebay.com/ebaymotors/ws/eB...OC%3AUS%3A1123