Those with VFN hoods..
#21
TECH Veteran
iTrader: (17)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It's been stated so many times it's ridiculous, but the ram air stickers were left on during the cast so you could apply your stickers in the correct spot. So, they offer to help you, you decline, and then you come here bitching and moaning about it fitting poorly? Sweet dude.
#24
TECH Resident
iTrader: (34)
Join Date: Nov 2008
Location: Satellite Beach, FL
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm not on the payroll, so I suggest you stop telling people I am. You can take the comments however you want, the bottom line is that from what I've seen on this forum alone, most people have zero idea how to align a hood. Your car is setup and the parts are all aligned at the factory, granted but every car is different. You can go buy an OEM hood and put it on your car and it will still need an adjustment.
I say check the car because if it has been in an accident and the panels have been realigned after the repair, that could cause the hood to not line up properly. I haven't seen any constructive comments from you on what to do, so I certainly would appreciate that before you jump on me, you add to the discussion, not take it off on a tangent about things that are factually incorrect.
Having said that, there are a variety of things that could be the problem at hand, and as several others have said, VFN included, sending pictures will help them remedy the problem.
BTW, Bird of Prey, did you contact them after you were quoted by the body shop? Did you go for a second opinion? Or are you just posting up that you had issues and sticking in a dig at me? And Blue, I'd love to take a shot at what you posted but I can't make heads or tails of what you are saying. In fact, you might even be the first person I've ever seen say that they had to grind on fender bolts.
Then again, I'll say anything to stay on payroll
If you guys feel the need to continue talking, PM me and keep it out of the thread.
I say check the car because if it has been in an accident and the panels have been realigned after the repair, that could cause the hood to not line up properly. I haven't seen any constructive comments from you on what to do, so I certainly would appreciate that before you jump on me, you add to the discussion, not take it off on a tangent about things that are factually incorrect.
Having said that, there are a variety of things that could be the problem at hand, and as several others have said, VFN included, sending pictures will help them remedy the problem.
BTW, Bird of Prey, did you contact them after you were quoted by the body shop? Did you go for a second opinion? Or are you just posting up that you had issues and sticking in a dig at me? And Blue, I'd love to take a shot at what you posted but I can't make heads or tails of what you are saying. In fact, you might even be the first person I've ever seen say that they had to grind on fender bolts.
Then again, I'll say anything to stay on payroll
![Icon Rolleyes](https://ls1tech.com/forums/images/smilies2/icon_rolleyes.gif)
#25
11 Second Club
iTrader: (49)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
When I bolted my sunoco hood on, I had no clue how to adjust it (not a body man at all )lol. It didn't look very good. I had it painted last week and when I picked the car up I was amazed how it looked. Fit as good as the stock hood. The body shop said it was one of the best hoods they had ever worked with.
#27
TECH Resident
iTrader: (34)
Join Date: Nov 2008
Location: Satellite Beach, FL
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Damn the paint job is nice but yeah that **** is jacked up for alignment for sure! Not sure on how much more you can pull the bracket down that catches the hood contraption in the front but still that's way off. **** and the bad part is that you have it painted so they won't take it back even though you can tell that **** is wack!
#28
12 Second Club
iTrader: (59)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not sure on how much more you can pull the bracket down that catches the hood contraption in the front but still that's way off.
#29
TECH Resident
iTrader: (34)
Join Date: Nov 2008
Location: Satellite Beach, FL
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Damn, sorry to hear that, my **** isn't quite like that but like i said I've heard of some bad molds that where used and some made it out there. Man for as much money as the hoods cost alone you think they would fit like a glove regardless if there is no paint on it yet or not. Damn near what $780 for the hood shipped and that's straight to a body shop because they wouldn't even send it to my residence. Mine was roughly around there.
#34
FormerVendor
iTrader: (21)
Join Date: Jun 2003
Location: illinois
Posts: 1,255
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Our hoods were NEVER priced this much.
Even with a price increase we seen earlier this year/last year...the price is now $595.00.
MOST of the guys on this board have purchased these on our GP's or with the Tech Discount - bringing the price to $500-530.00 prior to shipping.
No where near $795.00.
Our molds have not been/or were never bad.
The same hood that you will see in the picture below is from the same mold that your hood came from.
In your case, Your fenders and lights are off - and are not sitting correctly.
This has nothing to do with our hood - but it makes it look worse then it really is.
Here's what you need to do to adjust it:
Your fender corners lay on the Headlights. Lift the corners about an inch (like on the bottom picture below). The headlights are not mounted correctly either...As you can see there with the comparison between the 3 cars...how they should be fitting.
The front corners of the nose can then come up.
Once you do this, you can simply make 2-3 MINOR adjustments on the hood - as explained in the instructions we sent with the hood - or we can troubleshoot it for you after you correct the problems with the nose.
Here's the picture so you can look at 3 cars with our hoods on them:
![](http://i109.photobucket.com/albums/n80/dreaminofjeanie2/threecamaros.jpg)
Your buddies car is pictured at the top to compare how the nose should sit.
In this next picture, the hood has been cropped from the white car and we're comparing the angle to the hood on the orange car.
![](http://i109.photobucket.com/albums/n80/dreaminofjeanie2/threecamaros2.jpg)
Or once the nose is corrected, if you wish to take a drive...we can finish adjusting the hood for you here at our location - no charge
The hood in the top picture is a perfectly good hood and WILL fit as nicely as the others pictured.
Last edited by vfntech; 10-23-2009 at 11:21 AM.
#36
12 Second Club
iTrader: (6)
Join Date: Jul 2007
Location: chi-town
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yea i had issues aligning my hood too... i had to adjust where the headlights sat and mainly where the fenders were.. i loosened up the fenders, pulled them up about maybe a good 1 or 2 inches... it was a bitch but after about a good 2 hours its perfect now
#37
TECH Fanatic
iTrader: (6)
Join Date: Sep 2007
Location: Charlotte, NC / Ansonia,CT
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i love VFN hoods, ive bought 4 hoods from VFN over the years, never had any issues or problems
i will never buy a hood from anyone else! they hooked me up on my 86 iroc, 77 nova, 72 nova, and my 91 RS ![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
all had perfect fitment and looked amazing once everything was aligned correctly. just gotta take your time
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
all had perfect fitment and looked amazing once everything was aligned correctly. just gotta take your time
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#38
TECH Fanatic
Join Date: Dec 2001
Location: Way the hell in front of you
Posts: 1,114
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)