OEM Z28 Emblem Placement Measurements
#1
OEM Z28 Emblem Placement Measurements
I saw in the stickies that someone had done a thread like this for the SS Emblem Placement but there was nothing for the Z28 Emblem Placement. I was wondering if someone with a Z28 could take some measurements for me and post up like they did with the SS Emblems? I am installing them on a car and want to make sure they are oriented correctly.
I need the placement on both fenders as well as under the rear passenger taillight (Both Chevy Emblem as well as Z28, in relation to Chevy Emblem).
Thanks guys!
I need the placement on both fenders as well as under the rear passenger taillight (Both Chevy Emblem as well as Z28, in relation to Chevy Emblem).
Thanks guys!
Trending Topics
#8
TECH Fanatic
iTrader: (1)
Join Date: Jan 2009
Location: south jersey
Posts: 1,110
Likes: 0
Received 0 Likes
on
0 Posts
^ yeah yeah yeah im very busy at work but here you go man the bottom left of the "Z" is 3-1/4 from the wheel well. the whole emblem is an inch above that small indentation line. and the back top right of the "8" is 1-1/2 from the door jam. there ya go