faux CF thread?
can you post a pic of the radio trim?? I did mine with the di-noc and well... it's not picture worthy haha. Di-noc does not like the curves under the air vents (granted the Camaro trim is different)
On The Tree
Joined: Mar 2009
Posts: 183
Likes: 0
In about a month when I get home imma wrap my bike and post all the rice pics...
On a sidenote, Damn I wish i could use o3 z6's post as my sig but it's to damn big. I think that kid has had it coming for a while now
On a sidenote, Damn I wish i could use o3 z6's post as my sig but it's to damn big. I think that kid has had it coming for a while now
Not to rain on anybody's parade but wrapping the top of the Nitrous bottle isn't a good idea. If the bottle hasn't been hydrotested it will have to be removed to stamp the bottle. If it has been hydrotested you covered the test date and no reputable filler will fill it.
Not to rain on anybody's parade but wrapping the top of the Nitrous bottle isn't a good idea. If the bottle hasn't been hydrotested it will have to be removed to stamp the bottle. If it has been hydrotested you covered the test date and no reputable filler will fill it.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Not to rain on anybody's parade but wrapping the top of the Nitrous bottle isn't a good idea. If the bottle hasn't been hydrotested it will have to be removed to stamp the bottle. If it has been hydrotested you covered the test date and no reputable filler will fill it.
*going to take pics of the radio trim now*
Here's a few pics. They arent the greatest since it was dark in my garage and i had to use a tripod (limited my shots to the exterior of the car).
Radio Trim
Here you can see the corners aren't perfect. Since the outer piece simply can't be stretched far enough, i had to put 4 small pieces of wrap in each corner, then do the larger piece so that when there were parts of the plastic uncovered, the smaller pieces covered it.
Passenger
Drivers Side
Overall
Radio Trim
Here you can see the corners aren't perfect. Since the outer piece simply can't be stretched far enough, i had to put 4 small pieces of wrap in each corner, then do the larger piece so that when there were parts of the plastic uncovered, the smaller pieces covered it.
Passenger
Drivers Side
Overall
Doesn't look bad at all! I hope mine comes out OK when the Neffywrap shows up. Are you using the 3M 77 adhesive with it? I read online where a few people are using different adhesives with good success.
all i could find locally was the 3M "General Trim Adhesive" which they claim is a medium hold. it seemed to tack up pretty well, but i'd be curious to try something with a more intense hold.
looks awesome! I think i'm gonna order some neffywrap and try that instead... it's so much more flexible. It's also tempting to switch to t/a interior... the camaro has some ridiculous curves on the radio trim and door handle trim 
I'll get some pics up of what I wrapped later. I also helped out a buddy wrap some of his mustang parts, but mustangs are turds so who cares.
I'm debating on getting some of this and wrapping my FRC's and fuse covers. I've currently filled in the corvette letters, sanded, and painted with a hammer tone style bronze paint, and hand pinstriped "Chevrolet" across them. Anybody think this stiff will need heat tape under the FRC's? I'm not sure if the 3m adhesive will hold up to it either any thoughts?
I'm debating on getting some of this and wrapping my FRC's and fuse covers. I've currently filled in the corvette letters, sanded, and painted with a hammer tone style bronze paint, and hand pinstriped "Chevrolet" across them. Anybody think this stiff will need heat tape under the FRC's? I'm not sure if the 3m adhesive will hold up to it either any thoughts?
On The Tree
Joined: Mar 2009
Posts: 183
Likes: 0
LoL I went to do my digi camera while hard @ work and after I did the front remember it has a touch screen ;( so I didn't wanna waste the price
so I took the scraps and did my iPhone charger
here ya go. This is with the 3m di-noc I to clarify because it seems people are usein 2 differnt things.
so I took the scraps and did my iPhone charger
here ya go. This is with the 3m di-noc I to clarify because it seems people are usein 2 differnt things. 
Iyyob - Can you please move the charger and zoom out a little so I can read the entire officer's log? TIA
BTW - Anyone know how much heat can this stuff handle? I'm surprised no one has tried to wrap a lid, valve covers, small triangle sail panel, rear panel between tai lights on a TA, upper radiator support, etc. Let's get creative people.
BTW - Anyone know how much heat can this stuff handle? I'm surprised no one has tried to wrap a lid, valve covers, small triangle sail panel, rear panel between tai lights on a TA, upper radiator support, etc. Let's get creative people.