HID Color & Wattage Picture Thread
#66
11 Second Club
iTrader: (8)
Join Date: Jul 2005
Location: NW IN
Posts: 1,730
Likes: 0
Received 0 Likes
on
0 Posts
So I see where most of you guys are getting the kits, and I'd just be getting the lows. Is 9006 the correct bulb, or at leasst the bulbs most people are using? Also I'm thinking about getting either 5000k or 6000k, but as far as the 35W or 55W goes what are the benefits from each? Am I really going to tell a difference between the two?
From what I've searched 880 or 894 are what I would need for the fogs, but where are most of you getting those from?
Thanks
From what I've searched 880 or 894 are what I would need for the fogs, but where are most of you getting those from?
Thanks
#67
TECH Enthusiast
iTrader: (5)
Join Date: Dec 2005
Location: Lake Mary, FL
Posts: 506
Likes: 0
Received 0 Likes
on
0 Posts
55W will be brighter, upgraded wiring harness is recommended. 5000k will give you better light output than 6000k.
I used 3000k 55W for my fogs, 880 kit from DDM. I had to unscrew the base where the bulb mounts in order to screw it in, then reinstall the base.
DDM sells everything you'll need, including the upgrade harnesses.
don't bother getting highs... HID's take 30-40 seconds to warm up. Completely pointless for high beams unless you live in the middle of nowhere and frequent dark empty roads.
I used 3000k 55W for my fogs, 880 kit from DDM. I had to unscrew the base where the bulb mounts in order to screw it in, then reinstall the base.
DDM sells everything you'll need, including the upgrade harnesses.
don't bother getting highs... HID's take 30-40 seconds to warm up. Completely pointless for high beams unless you live in the middle of nowhere and frequent dark empty roads.