Lowered 00' Trans Am/Photoshoot
#1
Lowered 00' Trans Am/Photoshoot
Finally got around to lowering the TA yesterday and today. It was a PAIN IN THE *** because of rust, so it took pretty much all of yesterday just get the front done.
Used a set of DMS Springs for a nice raked stance, some SLP Bilstien Shocks and a UMI single adjustable Panhard Rod. Also cleaned up the car by getting rid of the decals on the filler panel and the B Pillar.
Before:
Now:
Used a set of DMS Springs for a nice raked stance, some SLP Bilstien Shocks and a UMI single adjustable Panhard Rod. Also cleaned up the car by getting rid of the decals on the filler panel and the B Pillar.
Before:
Now:
Last edited by LS1Transhed; 04-05-2010 at 06:42 PM.
Trending Topics
#9
Its supposed to drop it 1.30" all around, but its clearly much more of a drop on both ends (which I knew before hand and is why I chose these springs). The front pretty much has the top of the wheel even with fender, while the rear has the fender maybe about 2 inches above it.
#13
#15
Its supposed to drop it 1.30" all around, but its clearly much more of a drop on both ends (which I knew before hand and is why I chose these springs). The front pretty much has the top of the wheel even with fender, while the rear has the fender maybe about 2 inches above it.
#19
#20
And yes, Im a huge fan the DMS springs. Took forever for me to find a set.