5" in dash gauge cluster
#1
Staging Lane
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
anybody know of where i could find a pre cut in dash gauge pod like this for 5" gauges or a write up on how to make one yourself.. found this on another site in an old post but its something like i want to do for my gauge cluster for my car if possible..
![](http://i76.photobucket.com/albums/j14/bc_stopper_20/109vr.jpg)
![](http://i76.photobucket.com/albums/j14/bc_stopper_20/70pb.jpg)
![](http://i76.photobucket.com/albums/j14/bc_stopper_20/109vr.jpg)
![](http://i76.photobucket.com/albums/j14/bc_stopper_20/70pb.jpg)
![](http://i76.photobucket.com/albums/j14/bc_stopper_20/17cs.jpg)
#2
11 Second Club
iTrader: (27)
Join Date: May 2005
Location: Your girl's back door giving her the long stroke while you're at work
Posts: 6,799
Likes: 0
Received 3 Likes
on
3 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
They can be made pretty easy, just get a piece of thin sheet metal, plastic or plexiglass. Make a template out of cardboard and transfer it onto what you are making it out of. Mark where you want the gauges and cut them out.
But if you want to buy one, 6LE has one and the one you posted is in the thread below
https://ls1tech.com/forums/parts-cla...-5-gauges.html
But if you want to buy one, 6LE has one and the one you posted is in the thread below
https://ls1tech.com/forums/parts-cla...-5-gauges.html
#5
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Those are made by AdFab. I'm gonna get one pretty soon. I'd get Mark's, but the gauges I'm getting have peak recall buttons and such, so I need them exposed. Sucks, cause I like how Marks is covered and looks more OEM.
#6
TECH Enthusiast
iTrader: (1)
Join Date: Nov 2001
Location: Rochester, Michigan
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
They can be made pretty easy, just get a piece of thin sheet metal, plastic or plexiglass. Make a template out of cardboard and transfer it onto what you are making it out of. Mark where you want the gauges and cut them out.
But if you want to buy one, 6LE has one and the one you posted is in the thread below
https://ls1tech.com/forums/parts-cla...-5-gauges.html
But if you want to buy one, 6LE has one and the one you posted is in the thread below
https://ls1tech.com/forums/parts-cla...-5-gauges.html