whistler mod, plasti dipped wheels on my new '99 z28 (fixed links)
#1
On The Tree
Thread Starter
1999 z28 a4 174k build thread
about a month ago i picked up a 99 z28 a4, one owner with 122k miles. no rust underneath or anywhere else, and garaged all the time. completely stock with water pump, brake master cylinder and front brakes already replaced. I've done ripped off the front plate and grill, fra mod, and heater hose mod to the rear springs. all comments appreciated!
before plasti dip
after plasti dipped stock 16in wheels, only one coat tho
tried the front corners. i like it alot but it was too dark for the bulbs to shine thru, figured it was illegal so i peeled it off
and now whistler mod
I tried to sand the lenses while they was off by starting off with 800 grit, then 1000, then 2000 and finished it off by hand with meguries yellow fluff ball and plastix cleaner
also picked up slp dual/dual axle back system off local craigslist for $40
before plasti dip
after plasti dipped stock 16in wheels, only one coat tho
tried the front corners. i like it alot but it was too dark for the bulbs to shine thru, figured it was illegal so i peeled it off
and now whistler mod
I tried to sand the lenses while they was off by starting off with 800 grit, then 1000, then 2000 and finished it off by hand with meguries yellow fluff ball and plastix cleaner
also picked up slp dual/dual axle back system off local craigslist for $40
Last edited by Dark_Side; 06-14-2022 at 03:41 AM. Reason: Updated title
The following users liked this post:
WICKED SS (08-04-2022)
#3
On The Tree
Thread Starter
ya sorry about that. that one pic is from photobucket but im trying to figure out how to make them smaller. anything from flickr isn't working but it works and looks normal without the red labels on the other forums
#6
On The Tree
Thread Starter
thanks sinister!
i did completely finished one headlight lense finally. grinded down all the nipples then, 320 grit,400,600,800,1000,2000. finished it off with meguires yellow ball and plastix polish
i did completely finished one headlight lense finally. grinded down all the nipples then, 320 grit,400,600,800,1000,2000. finished it off with meguires yellow ball and plastix polish
Last edited by Dark_Side; 11-24-2017 at 10:07 PM.
Trending Topics
#8
On The Tree
Thread Starter
haha ya i was completely amazed at how awesome they turned out without a drill. tomorrow on lunch i gotta do the whole process again on the other headlight and use the die grinder with the meguries ball to see how much better they both will get
#9
dude, sharp car, not just saying that because i have an identical one lol, but i have to say, the whole plasti-dip wheels look, is about as original as a flame paint job these days, and twice as ugly. wheels are expensive but so worth it. other than that shes sharp man.
#11
On The Tree
Thread Starter
thanks jde, i know the plasti dip is prolly wore out on here but im not part of some huge car club or around people that are doing these mods so its new to me and i dont see anyone else doing it around me, plus i spent all my money tax money on the car. cant doing anything but these cheap easy mods and make it my own. i do plan on sparying a few more coats of plasti dip and then adding gloss black on the top. i still appreciate the comments tho
blownbayou, the exhaust is not finalized yet. its actually slid on 3" over my pre-existing pipe right in front of the axle, it surprisingly doesnt leak but i am still gonna get it right before i weld it up
blownbayou, the exhaust is not finalized yet. its actually slid on 3" over my pre-existing pipe right in front of the axle, it surprisingly doesnt leak but i am still gonna get it right before i weld it up
Last edited by Dark_Side; 11-24-2017 at 10:05 PM.
#13
that pic from the front looks sweet, im actualy gona take my grill off after seeing urs like that i think. aand i totaly get the cheap mods done at home im all about them, nice work
#15
On The Tree
Thread Starter
Thanks again jde, I also saw another black camaro without the grille and liked it better so I did it and love it. Although be very careful when pulling it off cause the bumper started to crack around the top clips, so I had to use pliers to chew at the plastic studs to break them. Do not just yank it off, I read that all over but if I had not paid attention to I would have destroyed my front bumper
DeLaRosa thanks, seems like a lot of work to put similar tips back on. I had an 89 firebird with 3.5in slash cut tips and really liked em. My buddy had a green 91 camaro rs at the same time had prolly 2.5in corsa style tips but he was an idiot and always kept f-ing up the car so these tips remind me to much of him and his car.
DeLaRosa thanks, seems like a lot of work to put similar tips back on. I had an 89 firebird with 3.5in slash cut tips and really liked em. My buddy had a green 91 camaro rs at the same time had prolly 2.5in corsa style tips but he was an idiot and always kept f-ing up the car so these tips remind me to much of him and his car.
#16
Thanks again jde, I also saw another black camaro without the grille and liked it better so I did it and love it. Although be very careful when pulling it off cause the bumper started to crack around the top clips, so I had to use pliers to chew at the plastic studs to break them. Do not just yank it off, I read that all over but if I had not paid attention to I would have destroyed my front bumper
DeLaRosa thanks, seems like a lot of work to put similar tips back on. I had an 89 firebird with 3.5in slash cut tips and really liked em. My buddy had a green 91 camaro rs at the same time had prolly 2.5in corsa style tips but he was an idiot and always kept f-ing up the car so these tips remind me to much of him and his car.
DeLaRosa thanks, seems like a lot of work to put similar tips back on. I had an 89 firebird with 3.5in slash cut tips and really liked em. My buddy had a green 91 camaro rs at the same time had prolly 2.5in corsa style tips but he was an idiot and always kept f-ing up the car so these tips remind me to much of him and his car.
#17
On The Tree
Thread Starter
The Whistler mod is painting the housing inside the headlight
No problem jde, glad to help. I think I'm gonna try to find those 3.5in slash tips. Anybody know where the best place to find them? Don't think I wanna use the local parts store shitty metal tips
No problem jde, glad to help. I think I'm gonna try to find those 3.5in slash tips. Anybody know where the best place to find them? Don't think I wanna use the local parts store shitty metal tips
Last edited by Dark_Side; 03-21-2013 at 04:59 PM.