LetsRide

iTrader: (3)

I haven't posted much about my car on the forum. But I thought this appearance mod would fit the bill. I was planing on doing a black satin Berger panel. But I have been wanting to build something with suede, leather, and carbon fiber. So I began with this small project.



Not me I'm the picture


The best angle before the resin was layed


This is the first of many parts that I will be hand laying carbon fiber.
I will continue later with finished pictures soon.

crimson_bird

iTrader: (4)

look forward to seeing the final product!

Blackpanther99

iTrader: (8)

Should look unique.

Unertl42

iTrader: (63)

Nice, that will be nasty

Blownbayou

iTrader: (7)

in for install pics..... looks nice

stevesfbody

Looks good dude

whytryz28

iTrader: (28)

Did this to mine, I used a lot of resin for the final top coat to get that nice gelcoat look. Looks like it will be 2 sheet and not one continuous?

https://ls1tech.com/forums/appearanc...el-v1-5-a.html

LetsRide

iTrader: (3)

No this is mine I'm doing the job. Also yes it's a two piece. A badge will cover to joint but they matched up pretty nicely even if I wasn't going to put a badge on it.

Thanks everyone. A brief install will be this weekend just to see what it looks like next to the NBM.

whytryz28

iTrader: (28)

Word of advice, the sides of the panel try not to build up with cf and resin too much or it won't sit flush with the rear quarters. I took about 1/2 off so I could get a good wrap around the edge and resin built up.