Hydro Graphic printing
Thread Starter
Staging Lane
Joined: Mar 2013
Posts: 88
Likes: 0
From: North Pole Alaska
Hydro Graphic printing Being in North Pole Alaska there are not a lot of options for things like power coating, and hydro dipping. So I am planning on being the first one to offer it to the area.
We already have films, activator, and some other odds and ends on the way to start playing with it. When I get back from NTC in a month we will start building our tank. We are planing on something at least 10 feet long, but as most things in Alaska and car related this **** can get expensive. We are looking at 3000 in stainless steel before any of the pluming.
So if anyone wants to follow our build and first dips stick around.
We already have films, activator, and some other odds and ends on the way to start playing with it. When I get back from NTC in a month we will start building our tank. We are planing on something at least 10 feet long, but as most things in Alaska and car related this **** can get expensive. We are looking at 3000 in stainless steel before any of the pluming.
So if anyone wants to follow our build and first dips stick around.
Thread Starter
Staging Lane
Joined: Mar 2013
Posts: 88
Likes: 0
From: North Pole Alaska
We got our activator and film in and have been playing with it but I had to go to NTC the day after we got it. We had some stuff turn out very well just using a tote filled with 90 degree water. As soon as I get back I will post some pics of what we have done and the building of our tank.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
my number one graphic we sell is Hades by Shawnaghty without a doubt i had to re do my car because i did not want what every one else was picking lol. I was not even thinking about Alaska but i am sure the prices are double up there so your sale price will just be more.
Thread Starter
Staging Lane
Joined: Mar 2013
Posts: 88
Likes: 0
From: North Pole Alaska
1 1/2 drain on the dipping side
Spots for heaters and pump to be threaded in. (It's up to Bryan if I can share pics of everything installed they are his heaters,pump and controller.) I down want to take any money out of his pocket.
For the devider I cheated and used left over pieces that were to short, I have another piece to add to it that will make sure that the water flows over the filter.
Lastly the garage got a much needed cleaning, there were 5 engines laying around and just a bunch of junk. So far I have used about 8 lbs of wire and 240 cubic feet of shielding gas.
Spots for heaters and pump to be threaded in. (It's up to Bryan if I can share pics of everything installed they are his heaters,pump and controller.) I down want to take any money out of his pocket.
For the devider I cheated and used left over pieces that were to short, I have another piece to add to it that will make sure that the water flows over the filter.
Lastly the garage got a much needed cleaning, there were 5 engines laying around and just a bunch of junk. So far I have used about 8 lbs of wire and 240 cubic feet of shielding gas.
