LS1121

iTrader: (17)

I ask every couple of years........................... Is there anybody making/selling seat foam for our cars? 93-02

GTOFBOD

sjsingle1

iTrader: (1)

ecklers and others ....sell 93-97 foam which does fit 98-02 ....you can find a couple of vids on u tube about it

my son bought the last foam ecklers had the other day.....might want to bug them about when they are going to restock

that a new seat cover too....

VIP1

is the foam compressed or breaking down or is it just sitting lower? It sits on thin wires which eventually cuts into the foam.. Put something between those wires and the foam. i I wrapped the wire "platform" in my seat base with cast-off section of metal screen and wrapped that with aluminum foil tape to keep a flexible base that can no longer cut through the foam. I basically used stuff I had lying around to do it and unfortunately didn't take pics. Thick burlap or canvas or felt may work as well. It needs to be something flexible but stronger or at least more cut resistant than the foam.

However, while googling for a picture, I found that Classic Industries sells the seat foam for a 1995 Firebird which might be the same seat foam as the base Firebird & Formula cloth seats from 1993-2002
https://www.classicindustries.com/sh...at-upholstery/

sjsingle1

iTrader: (1)

is classic part of ecklers ? and my son said the springs just cut the foam all up

sjsingle1

iTrader: (1)

Classic is out of stock now .....expect restock this month....they are not associated with ecklers

mike135531bubba

iTrader: (45)

I called ecklers and a bunch of other places, no one had it. So I just bought a set of aftermarket seats lol

LS1121

iTrader: (17)

I have a Camaro Z28, I believe the seats are different. Thanx guy's

sjsingle1

iTrader: (1)

have you pulled the seat foam out to compare to bird foam ?

LS1121

iTrader: (17)

I have seen pictures of Bird seat foam and they do not look like my camaro seat foam.

sjsingle1

iTrader: (1)

looks like the new foam pic I posted.....with some trimming

LS1121

iTrader: (17)

Thanx for the link. I do not see where they sell just the seat bottom. If I could get the bottom I would experiment on one for sure, my seats are shot, just the foam, I picked up a set of OEM take offs a couple of years back from a guy in Detroit.

sjsingle1

iTrader: (1)

the pic on the site shows a back foam and seat foam....but only the seat is what they are advertising.....seems kinda misleading i know

ramairbrc

iTrader: (1)

I have been looking for several years also. It is good to know that the 93 - 97 seat foam would work. Also good to know about insulating the foam from the springs.