New Sunoco Hood
Launching!
Joined: Oct 2002
Posts: 266
Likes: 0
From: Fort Collins, CO
Just making sure if this will be available as a pin on hood? I can't believe a company is actually making something that everyone wants. It is like have a custom hood shop for the fbod crowd, Thank you!
Originally Posted by Black 98 T/A
hey jeanie how about you all get busy with those fenders!?
You know, we have a saying here (at the shop) - you wanna start on monday?
seriously, we are considering the fender project - however, we are limited on guys and time and have many many projects to complete first...so if they are available it will be some time (possibly by the summer or so)....
The sunoco will be available in both the pin on and bolt on versions....
Thanks!!
Jeanie
TECH Enthusiast
iTrader: (3)
Joined: May 2003
Posts: 523
Likes: 0
From: Brentwood, TN/ Bowling Green, KY
Originally Posted by vfntech
You know, we have a saying here (at the shop) - you wanna start on monday?
seriously, we are considering the fender project - however, we are limited on guys and time and have many many projects to complete first...so if they are available it will be some time (possibly by the summer or so)....
The sunoco will be available in both the pin on and bolt on versions....
Thanks!!
Jeanie
seriously, we are considering the fender project - however, we are limited on guys and time and have many many projects to complete first...so if they are available it will be some time (possibly by the summer or so)....
The sunoco will be available in both the pin on and bolt on versions....
Thanks!!
Jeanie
Just wanted to see if you all were thinking about it. Stangkiller and i (nealwku98ta) brought this threads info on over to ls2 and there is alot of interest over there in this hood and even more so the fenders.
TECH Enthusiast
iTrader: (3)
Joined: May 2003
Posts: 523
Likes: 0
From: Brentwood, TN/ Bowling Green, KY
TECH Addict
Joined: May 2004
Posts: 2,564
Likes: 0
From: Bellingham/Edmonds, WA
Also have you considered making the spoiler? I know LG makes the G2 spoiler, but I have not seen it in person yet, and in pictures it does not look to have the contours as the one on the sunuco camaro, which just looks badass. Also the fenders, if you could do that 
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Staging Lane
Joined: Sep 2004
Posts: 70
Likes: 0
From: St Thomas, Ontario
Originally Posted by Nine Ball
Good direction so far, but I also agree that the upper corners and intersection where the hood meets the scoop need to be more rounded and smooth. As smooth as possible, to match the body lines of the Camaro better. put some more radius in those areas 
the spoiler would look great if it was like the G2, but blended into the factory piece. so make a total factory replacement with that spoiler blended in, so there wont be that ugly two piece look.
Hi Guys.
Thanks for bringing the thread over to ls2
it seems the interest there will be good too...
looking at the car however, if we were to do the fenders, we may need to do the quarters (to match up), then additionally we would need to make the rear bumper and the spoiler....although i'm sure that there will be an excellent market for this, i'm really not sure if we'll be able to do this. the first problem would be that we would need the parts to make molds from. the second problem would be time to make this project and complete our other projects we have going in a timely manner to keep all of our customers happy...
i'll talk to the owner more about these additional parts and see what we can/cannot do.
Thanks!
Jeanie
Thanks for bringing the thread over to ls2
it seems the interest there will be good too...looking at the car however, if we were to do the fenders, we may need to do the quarters (to match up), then additionally we would need to make the rear bumper and the spoiler....although i'm sure that there will be an excellent market for this, i'm really not sure if we'll be able to do this. the first problem would be that we would need the parts to make molds from. the second problem would be time to make this project and complete our other projects we have going in a timely manner to keep all of our customers happy...
i'll talk to the owner more about these additional parts and see what we can/cannot do.
Thanks!
Jeanie
RIP April 14, 2008
Joined: Aug 2004
Posts: 1,603
Likes: 0
From: the land where cars repeatedly hit my bumper when I'm in the store...
Originally Posted by black_z
Ill be purchasing this hood when im ready for a hood.
Originally Posted by gettinthere
Well I changed my mind, I don't want the line in mine, but I want it as soon as possible. Jeanie, we still looking beginning of March?
We're still trying for this time frame on the hood. The mold should be ready around the beginning of the month....from that point, the position on our gp list (which i will start very shortly), will determine the amount of time that it takes for everyone to recieve their hood. But, we will be running these thru constantly - to help keep the wait time down to a minimum....we understand everyone is pretty anxious...
The scoop without the line will be available first - while the scoop/hood with the middle body line will be available shortly after.I really like the entire package on these cars myself - looks very cool
....i just want to be realistic with everyone....we're still talking with the owner to see what we can/cannot do...so hopefully i can have a definate answer pretty soon for everyone.Jeanie
TECH Addict
Joined: May 2004
Posts: 2,564
Likes: 0
From: Bellingham/Edmonds, WA
Well good job on the hood for one VFN. Glad another alternative is being brought out there with smooth lines to match the 4th gens. The fender project would be a huge one, but I really think it would pay off in the end, so many people would be looking to transform their car into that racecar! Can't wait to see one of these hoods in person.
