Jantzer's awsome work???
#1
TECH Enthusiast
Thread Starter
iTrader: (9)
Join Date: Aug 2002
Location: Beloit, WI
Posts: 521
Likes: 0
Received 0 Likes
on
0 Posts
Jantzer's awsome work???
Check out what he sent me. Only charged me $245.
https://ls1tech.com/forums/ls1tech-sponsor-feedback/314433-jantzer-s-quality-work.html
https://ls1tech.com/forums/ls1tech-sponsor-feedback/314433-jantzer-s-quality-work.html
Trending Topics
#8
12 Second Club
iTrader: (3)
This is powder coated right? I have a friend that does powder coating very inexpensively and what he does to keep this from happening is bake the part several times to get the oil out of it. Even then it may still bubble up. If they are brand new parts it is less likely to occur. But a part that is impregnated with oil is extremely difficult to keep from bubbling.
I can sympathize with whoever did the work, but they should also offer some money back since it is on the quality of work expected.
Brian
I can sympathize with whoever did the work, but they should also offer some money back since it is on the quality of work expected.
Brian
#11
I'm having some trouble with Jantzer too. He told me he can have my calipers done in two weeks. It's now been two months. I don't even want to know what they're going to look like after seeing this thread.
#12
8 sec potential, 12 sec slip
iTrader: (50)
I will never do business with Jantzer again! He took his precious time to ship me a PHR I bought from him. What should have taken less than a week took over a month! He kept giving me the runaround every time I tried to contact him. And also when I FINALLY got it in, it didn't fit right. Its like the rod ends were 1/2 the thickness they should have been. If they were supposed to be like that, he didn't send the proper mounting hardware. Hell- he didn't even send ANY hardware. Which would have been fine except the stock bolts would not work on the rod ends of the PHR he sent me
#15
TECH Addict
iTrader: (13)
Join Date: Sep 2004
Location: Grand Junction, CO / Tomball, TX
Posts: 2,447
Likes: 0
Received 6 Likes
on
4 Posts
What a b*tch, there are far too many bad products coming from this person for there not to be a kruize to his house to jack him up. Alot of people are getting or have gotten shitty service mostly and some shitty products. That sucks for everyone.
#17
TECH Addict
Join Date: May 2004
Location: Bellingham/Edmonds, WA
Posts: 2,564
Likes: 0
Received 0 Likes
on
0 Posts
Jesus. $245?! I do powdercoating as well, and I know that the "chrome" powder is especially hard to keep from bubbling. However, for $245 that should not be an issue, and perfection should be expected! I preheat all the things I am going to coat and then clean them off with brake cleaner and heat them up again before I apply the powder. I just finished a set of valve covers in NBM, which required me to mix and experiment with 4 different powders, and still I only charged a fraction of $245! That is complete BS and for that price nothing less than perfect should be expected!