95formulalt1

iTrader: (13)

i wet seded the bird off the middle of tail light and now i want to make the plastic look like glass, HOW??????????????? it looks like **** and its faded help thanks

95formulalt1

iTrader: (13)

*sanded*

PontiacFan

iTrader: (104)

'Search' function should come in handy about now, ...

'Taillight center section', & other words like that will help.

2001 Pewter WS6

iTrader: (43)

If you sand it, you will have to buff out the sanding scratches. The finer the sand paper the easier it will be to remove the scratches. I would use 1000 or 1500 grit.

Luna

iTrader: (6)

wet sand it w/ 1500 then 2000 grit then get some 3M plastic polish and that will make it nice and shiny again

kraaazymike

iTrader: (2)

I did pretty much what these guys said. Sand to 2000 grit. Then bust out the polish. I highly recommend you use a buffer other wise thats just more elbow grease than anyone is willing to use. Took me only a few mins of buffing and it was shiny as the rest of the car.

95formulalt1

iTrader: (13)

i used 1500 and then 2000. and got the old bird off but should i use to for polish

95formulalt1

iTrader: (13)

Thanks

00firebird

iTrader: (3)

heres a nice page on wetsanding
http://autopia.org/forum/showthread.php?t=17769
all you need is the polish and a buffer