Fr3shFr0st

ok so i am taking otu my stock grill and i searched this topic and everyone said pull really hard. so i did and the two ends came out but the middle didnt. am i stupid and its bolted on somehow or what? how do i get this off, do i just pull even harder cause i ripped the grill a lil bit.

i'm just that manly

WhiteKnightZ28

iTrader: (5)

The grill will rip, the car will not... pull harder.

JonB

iTrader: (3)

I had the same problem the sides came off easy but the ceter was still attached. I ended up just cutting up the grill and then pulling out the tabs that hold the grill in.

H8 LUZN

F That...

I pulled the bumper.. and yes there are 'nuts' holding it on

Maybe im a little more '****' but guess what i'd rather spend 30mins than 500 bucks getting it repainted. Flexing paint = not generally a good idea...

Arachnotron

You will not damage the paint. Just pull harder.

Texas-TA

I just pulled my brothers out and it was just clipped in. Pull hard

Camaro Ryder KV

iTrader: (12)

i just pulled mine out, same thing though, sides came out east, and middles were a bitch, there are 3 on top and 3 on bottom, get a flathead screwdriver and put a cloth on top of it, wont scratch paint, thats how i did mine, just "pop" it first, then pull

BigBenz

iTrader: (7)

Pull harder

jmm98LS1

iTrader: (28)

I saw two different people do the "pull harder" method and they both put spiderwebs in their paint from it. Dunno if it was factory paint or not, but it made me spend the extra half hour to pull the bumper when I did mine.