New Engine Pics
05-10-2006, 09:58 AM
#1
New Engine Pics Since I had to add a vacuum system on Jens car, due to high crankcase pressures, I decided to dress up the engine bay a bit. I still need to do a lot to it to make it look how I would like. So I added the Mr. Gasket Evac-system, GMPP Cast Valve Covers, Taylor (blue, Jen's choice 
) spark plug wires and separators, and relocated the coils under the cowl. I also cleaned up the harness for the injectors, rerouted then behind the fuel rails for a cleaner look. What do you guys think (click on images to see larger pics)?
) spark plug wires and separators, and relocated the coils under the cowl. I also cleaned up the harness for the injectors, rerouted then behind the fuel rails for a cleaner look. What do you guys think (click on images to see larger pics)?
Trending Topics
05-11-2006, 09:35 AM
#12
Thanks everyone!
Yup, I went to Home Depot and purchasea 24" long, 1/4-20 threaded rod and a bag of nuts and washers. Then I used a pair of brackets that came in my B&M Oil Cooler kit and bent it to support the coils. It came out pretty good for the 30 minutes I dedicated to fabricate this.
It is actually a 90mm Accufab TB. 6.0L heads? 
Thanks Luis. The hood is still the same Glasstek Z28 hood ... it just barely clears. 
I had a hard time trying to get these, for a long time after SEMA I could not find them. Luckily Scoggin-Dickey had them in stock and I was able to purchase them. 
Originally Posted by Xtnct00WS6
Looks great man! Homemade coil relcation brackets I take it?
Originally Posted by orangeapeel
Wow! What is that TB? 100mm?!!?
I see someone is running 6.0L heads!
I see someone is running 6.0L heads!
Originally Posted by Luis Castellanos
aaah.!!
Nice engine bay George...
New hood?
Nice engine bay George...
New hood?
Originally Posted by WILWAXU
Love those valve covers! 
