all your custom trans am interior work in here
Originally Posted by GunshotZ28
Does anyone know if an A4 center console out of a '98-'02 T/A would bolt right into a '96 T/A A4?
Can someone please PM some info on wear to find the vent rings???
BTW it looks like you would have to remove the vents and grind off the edges of them to put the rings on...how hard are they to get out?
BTW it looks like you would have to remove the vents and grind off the edges of them to put the rings on...how hard are they to get out?
Here's my latest one, I fit a 7" LCD in our 1.5 DIN spot without relocating anything. I was the first figure out how to put blue gauges in a T/A and LED interior lights too. Next project is a carputer with 7" LCD VGA touchscreen. Glad others have done this, so this one should be pretty easy...er 
Originally Posted by InfiniteReality
Here's my latest one, I fit a 7" LCD in our 1.5 DIN spot without relocating anything. I was the first figure out how to put blue gauges in a T/A and LED interior lights too. Next project is a carputer with 7" LCD VGA touchscreen. Glad others have done this, so this one should be pretty easy...er
and im only kidding, i can see you had just turned it off
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
That's InfiniteReality's car...
https://ls1tech.com/forums/appearance-detailing/436902-t-blue-odometer.html
http://www.ledgauges.com/id26.html
https://ls1tech.com/forums/appearance-detailing/436902-t-blue-odometer.html
http://www.ledgauges.com/id26.html
My custom interior finally done! All built by me and a good friend of mine in my garage. Took about 3 months of weekend work to get it done, but I think it all turned out great!
Went with the all black suede look everywhere and built the custom rear seat delete and amp enclosures myself
Went with the all black suede look everywhere and built the custom rear seat delete and amp enclosures myself
Was doing some searching on interiors and found this....OMG, this interior is the sh*t.
I usually like the stock look but this is just so nice..Trent
Copy & Paste Moderator
Joined: Apr 2002
Posts: 9,764
Likes: 208
From: Eastern MA
https://ls1tech.com/forums/appearance-detailing/774205-leather-interior-panel-kit-any-interest.html
What I have now is just a 7" LCD. I just relocated my HU (nothing more than a typical flipout CD/DVD player) to underneath the driver's seat and all the controls are done via the stock steering wheel controls. Now the carputer, yep that will be able to do it alot more than what I have. GPS, BlueTooth, videos & music (via hard drive = LOTS of both), touchscreen, WiFi, custom skin for background, etc. Cables came in Friday, so this week I'll be ordering a 7" Lilliput VGA screen to make another bezel with. Only thing left after that will be a DC-DC regulator/PS, WiFi & GPS antenna and StreetDeck program. I just built a new computer for the house, so my old one will be put to good use and I've already set it up. Hopefully by the end of the year I'll have it all installed and I can sell my current setup to make a little $ back for what I'm spending on it now.
Hopefully by the end of the year I'll have it all installed and I can sell my current setup to make a little $ back for what I'm spending on it now. 
Here's my latest one, I fit a 7" LCD in our 1.5 DIN spot without relocating anything. I was the first figure out how to put blue gauges in a T/A and LED interior lights too. Next project is a carputer with 7" LCD VGA touchscreen. Glad others have done this, so this one should be pretty easy...er