Project "ObseSSed"
Thread Starter
TECH Fanatic
iTrader: (1)
Joined: Oct 2003
Posts: 1,018
Likes: 0
From: Marrero/ New Orleans
found the problem
there is some type of security that stops the car from starting that runs through the body module and pcm
if i ground that wire the car will start up
dont know y im having trouble with that know
but i did have a few ignition problems along time ago that i thought was the ignition switch
maybe it was the security **** acting up
there is some type of security that stops the car from starting that runs through the body module and pcm
if i ground that wire the car will start up
dont know y im having trouble with that know
but i did have a few ignition problems along time ago that i thought was the ignition switch
maybe it was the security **** acting up
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Fanatic
Joined: Jun 2006
Posts: 1,411
Likes: 5
From: Dallas, TX
It might have been something as simple as locking the car with the keyless entry fob and then unlocking the door with your finger from the inside. That'll set off the security and the car won't start.
found the problem
there is some type of security that stops the car from starting that runs through the body module and pcm
if i ground that wire the car will start up
dont know y im having trouble with that know
but i did have a few ignition problems along time ago that i thought was the ignition switch
maybe it was the security **** acting up
there is some type of security that stops the car from starting that runs through the body module and pcm
if i ground that wire the car will start up
dont know y im having trouble with that know
but i did have a few ignition problems along time ago that i thought was the ignition switch
maybe it was the security **** acting up
http://www.socalmuscle.net/forum/showthread.php?t=1332
next time you have a problem like that.always post up or do a search. might save you a headache. come on guys lets help him out here.
Thread Starter
TECH Fanatic
iTrader: (1)
Joined: Oct 2003
Posts: 1,018
Likes: 0
From: Marrero/ New Orleans
thanks 4 the link
all i did is ground a wire thats goes into the body module and the car start up every time
ill look into what u posted some more
all i did is ground a wire thats goes into the body module and the car start up every time
ill look into what u posted some more
Last edited by slammed1500; Mar 17, 2010 at 01:11 PM.
omg..that custom work is BAD ***!!! damn nice car..i dont realy agree with the bags but i know WHY you did it...damn nice job and props for being different..90% of us are caught up in the *faster than the jonses* race...you went a completely different route..and did a damn fine job of it too...hats off to you sir!! i wish i could be HALF the craftsman that you are.
Thread Starter
TECH Fanatic
iTrader: (1)
Joined: Oct 2003
Posts: 1,018
Likes: 0
From: Marrero/ New Orleans
omg..that custom work is BAD ***!!! damn nice car..i dont realy agree with the bags but i know WHY you did it...damn nice job and props for being different..90% of us are caught up in the *faster than the jonses* race...you went a completely different route..and did a damn fine job of it too...hats off to you sir!! i wish i could be HALF the craftsman that you are.
i try 2 be a lil diff. than other people
TECH Regular
Joined: May 2009
Posts: 468
Likes: 0
From: Honolulu, HI
Looks bad ***!! Dont pay any attention to the haters. They call it "rice" since it doesnt look like a 'red neck" car!! lol. I would loose the altezas and go with tinted stockers or black outs. Cant wait to see it painted. Post pics when you are done!!
Thread Starter
TECH Fanatic
iTrader: (1)
Joined: Oct 2003
Posts: 1,018
Likes: 0
From: Marrero/ New Orleans
so here is how the new wires will be. i still have 2 put some wire loom on a few things
now keep in mind that all this is mounted temporary its all coming out when the car gets painted
notice the rubber grommet around the harness all i did 4 this is slice a piece of rubber hose down the middle cut it 2 length and then glued the 2 ends together with super glue
and i have some seals it grommets for the battery cables through the firewall
new location 4 the fuse box
the harness now gets into the car through the hinge pillar just like it did through the firewall
since i had the car apart i took some pics of a few things
trans cooler
power steering cooler
ill be taking the factory power steering reservoir off and putting a bling bling reservoir 2 match the location of the ac drier bottle on the other side
bling p/s pulley
new valve covers
proportion valve 2 delete the abs block
now keep in mind that all this is mounted temporary its all coming out when the car gets painted
notice the rubber grommet around the harness all i did 4 this is slice a piece of rubber hose down the middle cut it 2 length and then glued the 2 ends together with super glue
and i have some seals it grommets for the battery cables through the firewall
new location 4 the fuse box
the harness now gets into the car through the hinge pillar just like it did through the firewall
since i had the car apart i took some pics of a few things
trans cooler
power steering cooler
ill be taking the factory power steering reservoir off and putting a bling bling reservoir 2 match the location of the ac drier bottle on the other side
bling p/s pulley
new valve covers
proportion valve 2 delete the abs block
Last edited by slammed1500; Mar 22, 2010 at 08:28 PM.
