BadBoyRacing1

i saw a picture of a ws6 with clear honeycomb tail lights. i thought it looked pretty sweet..any one now how to do this mod?

Swiat34

iTrader: (9)

I've been told noone make taillights like that, but if you want a pic with clear tails...Photoshop is the way! lol I've been thinking 'bout that myself too, tho. I think if you took the red lens off the taillight and heated a piece of Lexan, you could form your own clear lens. Then mask off a billion octigons on the inside side of the lens and spray black paint over to make the honeycomb. If I can get myself a old taillight for cheap I'll try it and let everyone know how it turned out, maybe make a write up...IF I can get one. Swat

ezekielta

Here is a pic of one with cleared honeycombs, I think it would look good if the center piece was buffed out or the bird changed to a silver one.

Blackbirdws6

iTrader: (7)

wow I would love to do that. Someone has to get this going.

-Brian

phantomzer0

iTrader: (17)

I think that is just a trick of light and not actually clear honeycombs.

Blackbirdws6

iTrader: (7)

regardless I want them.

01LS1Trooper

iTrader: (2)

Definitely a modded pic. Look at the background...But cool none the less. I would buy them. Someone make them...NOW

1 Bad Ass Formula

iTrader: (7)

That seems to be a photoshopped pic with everything being a bluish gray or grayscale except the filler panel. When I first saw that pic I had to look twice.

xXSilencerXx

iTrader: (4)

It's somebody's sig. That's why.

Ls1CamaroGuy87

iTrader: (7)

I have never seen it done before, sounds like a creative idea......anyone want to photoshop it?

Swiat34

iTrader: (9)

The pic in question IS photoshop edited. I talked to the guy yesterday about his tails...that's Chromeplated500's sig pic. Swat

sdm1234

iTrader: (8)

here's what i photoshopped.

i found this pic somewhere on the net

bastien

iTrader: (1)

that's my car on the left and no I didn't photoshop it like that lol. Someone took it and made it a sig! woot!

here is the original

WS6Jim

iTrader: (9)

I have no affiliation but I found this link from a local board that will do custom lenses for any car.
http://www.klearz.com/index.html

Ls1CamaroGuy87

iTrader: (7)

the photoshop of clears doesnt look half bad, just depends how they will light up when the brakes applied, dont want uneven lighting.....

01LS1Trooper

iTrader: (2)

I sent them an email about it so we'll see!

DirtyBird222

iTrader: (7)

spider light LEDs for the win on that.

THEBRAD

iTrader: (3)

subscribing to know if these may be made

transam5.7lt1

iTrader: (18)

It can't be done with the OEM lights, because of the lenses, the honeycomb taillights are a two piece design, which consists of the housing/reflector and the red lenses. The LT1 taillights were a three piece, housing/reflector, middle red part, and the clear outer lenses, which if you separate them and remove the middle red part leaves you with clear taillights.

sdm1234

iTrader: (8)

this is from brent franker's site...