I'm looking for a new converter and the 5c is on the top of my list. Has anyone had any problems with these and what kind of 60' are you running with what mods. last summers setup ran 12.45-12.6 with 2.73 gear and a tci3500 on a bolt on car this winter i have added a 12 bolt with 4.10 and plan on doing a head and cam combo from texas speed with the 5.3 heads and a ms4.

 

Also interested as I just ordered mine. Price was unbeatable. Chris was great to talk to, and answered all of my questions... plus he didn't haggle me into spending out of my price range and told me what he thought would work best INSIDE of my price range. Very helpful and courteous. Can't wait to get it. Thanks to Circle D.

 

I run a 5C in my Trans Am. It hits real hard at launch and pulls strong up top as well. It's amazingly streetable (relatively speaking) for such a large converter and has a nice positive lockup. I've been running it since April this year and put about 5K miles without a problem. You may want to look at the 4C for your setup and restall when you upgrade the heads and cam.

 

Well you should have known I was going to step into this thread. I swapped from a 4C to a 5C in our quicker car and with no other changes, this is what happened.lol.






Granted this was with pretty stout 408 and good air, but I never expected it. The 5C put down 1.29 60fts for us and that's an all motor pump gas car at a little over 3300#s with a 4L60E.

It's a great converter!

 

Lol. It was just a matter of time, but at least you added a disclaimer at the bottom.

I have some pics of the wheels up (seems to happen almost every time with this converter), but nothing like that. Of course I'm still on 16" DR's so I can't complain.

 

i'm going to do the heads and cam this winter to

 

what stage of converter are you running

 

what gears are you running in the camaro

 

The gears at that time were 3.90s (I wish i still had them).

The 5C I was using was a Stage II " Competition Billet Series". It sure got the job done.

I'm running their 8" race converter now since we swapped to the powerglide and it is definitely doing us right. Stay tuned

 

sounds good how much power did your 408 make i need a profile pic like yours

 

I had a TCI ssf 3500 stall...Just dropped off my car today to have my 5c put in..My shop is real busy but they said at the latest it will be monday when I get the car back,so I'll make apost then about it...Off topic but I dont think the ms4 will fit with the 5.3 heads..You can run the ms3 BUT YOU MUST SPECIFY TO RECESS...Fwiw I have those heads with a 232/238 6xx/6xx 111 +2 lsa xfi cam

 

yeah you have to fly cut the pistons i made a tool with a cracked head i had to fly cut on the car