Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

Which Cooler to Get???

Old Dec 1, 2003 | 06:08 PM
  #1  
BoneSS's Avatar
Thread Starter
TECH Fanatic
iTrader: (9)
 
Joined: Nov 2003
Posts: 1,371
Likes: 0
From: Ashland, KY
Default Which Cooler to Get???

What is a good cooler to get? I have been looking at the B&M 24 and 28, is there any difference in installation of the two also? Also, do I really have to have the temp guage? Thanks.
Reply
Old Dec 1, 2003 | 07:30 PM
  #2  
98SS Blackattack's Avatar
TECH Fanatic
 
Joined: Jun 2002
Posts: 1,227
Likes: 0
From: Indianapolis
Default

People run 19, 24 and 28. Most go with a 24. All of them are the same besides the size.I have never heard of a problem with running any of them. Most people dont run a temp gauge. But it couldnt hurt.
Reply
Old Dec 1, 2003 | 08:12 PM
  #3  
RPM WS6's Avatar
LS1Tech Administrator
20 Year Member
Shutterbug
Community Builder
Community Influencer
iTrader: (3)
 
Joined: Nov 2001
Posts: 34,605
Likes: 2,508
From: Schiller Park, ILL Member: #317
Default

I've been doing fine with my B&M 16K cooler...
Reply
Old Dec 1, 2003 | 08:48 PM
  #4  
onebadz's Avatar
TECH Fanatic
 
Joined: Aug 2003
Posts: 1,768
Likes: 0
From: Lexington, NC
Default

Yea most people go with the 24k but you should be fine with any of them. I dont think there will be any variation in the installation between the coolers. Good Luck

Wes
Reply
Old Dec 2, 2003 | 05:55 PM
  #5  
BoneSS's Avatar
Thread Starter
TECH Fanatic
iTrader: (9)
 
Joined: Nov 2003
Posts: 1,371
Likes: 0
From: Ashland, KY
Default

Thanks! I have heard that the 24 comes with mounting hardware and 28 does not? I have been trying to confirm this with Thunder Racing since they seem to be the only sponsor I have found with them.
Reply
Old Dec 3, 2003 | 09:06 AM
  #6  
jlrz28's Avatar
10 Second Fun Car
iTrader: (7)
 
Joined: Nov 2002
Posts: 2,045
Likes: 1
From: Pearland, Tx
Default

I have a 15,000 GVW cooler but my transmission took a dive. When I get it back im going to order a 25,000GVW and hook the 2, in series.
Reply
Old Dec 4, 2003 | 01:15 PM
  #7  
BoneSS's Avatar
Thread Starter
TECH Fanatic
iTrader: (9)
 
Joined: Nov 2003
Posts: 1,371
Likes: 0
From: Ashland, KY
Default

I contacted Thunder Racing and was told that their 24 has all mounting hardware and radiator adaptors, so I guess I am going to get that. That is all I need for this isn't it? Thanks.
Reply
Old Dec 4, 2003 | 01:31 PM
  #8  
DEEZ98Z's Avatar
10 Second Club
iTrader: (5)
 
Joined: Dec 2002
Posts: 1,003
Likes: 0
From: Maryland
Default

I bought mine from JEGS pretty cheap... came with everything that you will need
Reply
Old Dec 5, 2003 | 06:21 AM
  #9  
BoneSS's Avatar
Thread Starter
TECH Fanatic
iTrader: (9)
 
Joined: Nov 2003
Posts: 1,371
Likes: 0
From: Ashland, KY
Default

Has anyone used a Hayden Cooler?
Reply
Old Dec 5, 2003 | 07:19 AM
  #10  
foff667's Avatar
LS1TECH Sponsor
iTrader: (2)
 
Joined: Jul 2003
Posts: 7,986
Likes: 3
From: Clermont, FL
Default

i got a b&m 19k unit...under normal driving for over 1/2 hour it hovers around 150 according to atap...but they heatsoak quickly and have seen temps of 190+ at the track.

lata
Bill
Reply
Old Dec 5, 2003 | 01:10 PM
  #11  
BoneSS's Avatar
Thread Starter
TECH Fanatic
iTrader: (9)
 
Joined: Nov 2003
Posts: 1,371
Likes: 0
From: Ashland, KY
Default

Thanks guys. I ordered the 24k today.
Reply
Old Dec 5, 2003 | 09:22 PM
  #12  
Ragtop 99's Avatar
TECH Senior Member
iTrader: (7)
 
Joined: Nov 2001
Posts: 9,491
Likes: 1
From: Bethesda, MD
Default

Get a plate type cooler. 19k is fine for most people except very hot climates or auto-cross
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:54 PM.