Which Cooler to Get???

Reply Subscribe

Thread Tools

Search this Thread

Dec 1, 2003 | 06:08 PM

BoneSS

Thread Starter

TECH Fanatic

iTrader: (9)

Joined: Nov 2003

Posts: 1,371

Likes: 0

From: Ashland, KY

Which Cooler to Get???

What is a good cooler to get? I have been looking at the B&M 24 and 28, is there any difference in installation of the two also? Also, do I really have to have the temp guage? Thanks.

Dec 1, 2003 | 07:30 PM

98SS Blackattack

TECH Fanatic

Joined: Jun 2002

Posts: 1,227

Likes: 0

From: Indianapolis

People run 19, 24 and 28. Most go with a 24. All of them are the same besides the size.I have never heard of a problem with running any of them. Most people dont run a temp gauge. But it couldnt hurt.

Dec 1, 2003 | 08:12 PM

RPM WS6

LS1Tech Administrator

iTrader: (3)

Joined: Nov 2001

Posts: 34,652

Likes: 2,577

From: Schiller Park, ILL Member: #317

I've been doing fine with my B&M 16K cooler...

Dec 1, 2003 | 08:48 PM

onebadz

TECH Fanatic

Joined: Aug 2003

Posts: 1,768

Likes: 0

From: Lexington, NC

Yea most people go with the 24k but you should be fine with any of them. I dont think there will be any variation in the installation between the coolers. Good Luck

Wes

Dec 2, 2003 | 05:55 PM

BoneSS

Thread Starter

TECH Fanatic

iTrader: (9)

Joined: Nov 2003

Posts: 1,371

Likes: 0

From: Ashland, KY

Thanks! I have heard that the 24 comes with mounting hardware and 28 does not? I have been trying to confirm this with Thunder Racing since they seem to be the only sponsor I have found with them.

Dec 3, 2003 | 09:06 AM

jlrz28

10 Second Fun Car

iTrader: (7)

Joined: Nov 2002

Posts: 2,045

Likes: 1

From: Pearland, Tx

I have a 15,000 GVW cooler but my transmission took a dive. When I get it back im going to order a 25,000GVW and hook the 2, in series.

Dec 4, 2003 | 01:15 PM

BoneSS

Thread Starter

TECH Fanatic

iTrader: (9)

Joined: Nov 2003

Posts: 1,371

Likes: 0

From: Ashland, KY

I contacted Thunder Racing and was told that their 24 has all mounting hardware and radiator adaptors, so I guess I am going to get that. That is all I need for this isn't it? Thanks.

6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'

Brett Foote

Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

Pouria Savadkouei

Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

Verdad Gallardo

7 Most Reliable High-Performance Engines GM Has Ever Built

Verdad Gallardo

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Dec 5, 2003 | 06:21 AM

BoneSS

Thread Starter

TECH Fanatic

iTrader: (9)

Joined: Nov 2003

Posts: 1,371

Likes: 0

From: Ashland, KY

Has anyone used a Hayden Cooler?

Dec 5, 2003 | 07:19 AM

#10

foff667

LS1TECH Sponsor

iTrader: (2)

Joined: Jul 2003

Posts: 7,986

Likes: 3

From: Clermont, FL

i got a b&m 19k unit...under normal driving for over 1/2 hour it hovers around 150 according to atap...but they heatsoak quickly and have seen temps of 190+ at the track.

lata
Bill