Speedo recal for TH400 with speed sensor

Reply Subscribe

Thread Tools

Search this Thread

Mar 31, 2010 | 02:06 PM

dschmittie1

Thread Starter

10 Second Club

iTrader: (64)

Joined: Aug 2005

Posts: 2,344

Likes: 2

From: York, PA

Speedo recal for TH400 with speed sensor

OK so I just installed a Rossler TH400 in my car. Car was a M6. Trans has a speed sensor in it. Anyone know what I need to change to make it read correctly? Thanks

Mar 31, 2010 | 03:21 PM

jts98z28

TECH Apprentice

iTrader: (18)

Joined: Mar 2008

Posts: 302

Likes: 0

From: nj

https://ls1tech.com/forums/automatic...th400-faq.html......post 2

Mar 31, 2010 | 04:07 PM

dschmittie1

Thread Starter

10 Second Club

iTrader: (64)

Joined: Aug 2005

Posts: 2,344

Likes: 2

From: York, PA

I have the right connector I need to know what to change as far *** VSS info in the tune to get the speedo in line.

Mar 31, 2010 | 05:37 PM

jts98z28

TECH Apprentice

iTrader: (18)

Joined: Mar 2008

Posts: 302

Likes: 0

From: nj

same thread, "I used my HPTuners software to delete all the references to the A4 trans and it has worked great, you can also use a manual trans program or ECM, but the speedo signal will need to be multiplied by 2.5 to read correctly."......is that what ur talking about?

Mar 31, 2010 | 07:58 PM

dschmittie1

Thread Starter

10 Second Club

iTrader: (64)

Joined: Aug 2005

Posts: 2,344

Likes: 2

From: York, PA

Quote:

Originally Posted by Bro Inc

Lets make it simple a skip the bullshit. The bone stock LS1 A4 has a 40 tooth reluctor wheel, same as the th400.

So all you do have to do is use the speedo information from a stock A4 tune adjusted to your tire size.
You can just copy and paste it all, it's that easy.

Bingo that is what I was looking for. I know right now my speedo is reading very high. Like is says 100 and I am doing about 40

Apr 2, 2010 | 03:28 PM

VIPER EATER

12 Second Club

iTrader: (1)

Joined: Feb 2005

Posts: 145

Likes: 0

From: spokane wa

hey guys i also have a th400 in my ss and where the speed sensor would go is like a steel "plug" can i just pop this out and put in this reluctor wheel and speed sensor from a 90 ss pickup? i was just thinkin of tappin into the abs on the driver front hub but would like to keep my abs if i can is this possible to do?
thanks Jason

Apr 3, 2010 | 10:30 AM

jts98z28

TECH Apprentice

iTrader: (18)

Joined: Mar 2008

Posts: 302

Likes: 0

From: nj

Quote:

Originally Posted by VIPER EATER

hey guys i also have a th400 in my ss and where the speed sensor would go is like a steel "plug" can i just pop this out and put in this reluctor wheel and speed sensor from a 90 ss pickup? i was just thinkin of tappin into the abs on the driver front hub but would like to keep my abs if i can is this possible to do?
thanks Jason

nah you cant keep your abs if you do it that way