Im looking at doing a swap from my m6 to a a4, i found a good deal on a vig 3600 stall and im wondering if it's to small?? my setup is in my sig my car is making 524rwhp 563rwtq. plan on getting off the safe tune though car should make around 550rwhp 600rwtq

 

the vig 3600 will be fine.

 

if those numbers are with nitrous, I don't think you would want any bigger

 

ok so you think a 3600 would be fine. I know on the dyno the cam really starts coming on about 3900-4000. Do you think id be happier with a 4000?

 

ya i would go bigger

 

Question? Is it the Vigilante convertor that is typically rated about 400 rpm's low? The Yanks are usually pretty close. If that is true than a 3600 Vig would be about the same as a 4000 Yank. If not disregard this post.

 

i would not do a 4000 itll be too loose sprayin

 

The Vig 3600 wil stall around 4000. I have that converter in my car right now.

 

3600....

 

I bet it stalls higher than 4k when he hits the button....