BlackLS1Blazer

Hey guys,

I searched and couldnt find much on the subject, but will a truck transmission work in an F-body? I'm looking at picking up a 2002 Camaro that needs a transmission (auto). I can't find one for a Camaro, so i thought about using one from a truck.

Any help would be awesome!

Thanks,

Derek

Jeremy@RPMTransmissions

iTrader: (12)

If it is a similar year truck trans it should work fine. You will just need to swap the tail housing from your camaro trans over to the truck trans.

BlackLS1Blazer

So, all of the electrical plugs should hook up no problem?

Jeremy@RPMTransmissions

iTrader: (12)

All the plugs are the same. If the trans has a PRNDL switch the shifter shaft will need to be changed. But other than that and the tail housing you shouldn't have any other issues.

BlackLS1Blazer

Awesome! Thanks a lot!

charleysheen

very simple, even the 4l80 swap aint bad, i did it in my SS and it was a piece of cake

RPM Graphics

iTrader: (26)

what's the difference between the truck & camaro tail housing?

ivan_key

The Torque arm bolts to the shaft on the car 4l60e and the truck 4l60e didn't have a torque arm

99_LS1_WS6

iTrader: (5)

The 80 requires a little massaging of the tunnel.

RPM Graphics

iTrader: (26)

so i won't have a problem putting a trans from a camaro into my truck but going the other way is the problem, truck trans into camaro?

Cronic_Moronic

GM transmissions are a 3 peice design with a bell housing, tail housing and center section.

The bell and center interchange from the trucks to F-Bodies. The tail shaft does not.