Need help choosing stall converter
#1
On The Tree
Thread Starter
iTrader: (10)
Join Date: Jan 2007
Location: Chicago
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Need help choosing stall converter
Looking to add a stall converter to my car.
Current setup as follows: 400-425 rwhp.
LS1 Engine,Patriot LS6 Heads, Comp Cam 224/224 .581 lift cam,headers,Ported Fast 90mm Intake & Throttle Body,stock 28lbs injectors,Stock 3.27 rearend,Stock 4L60E Trans.
Looking for strip converter for best et in quarter mile.
Car is used mainly at the track. Not a daily driver. Minor street use - just to and from track and local car shows.
Current setup as follows: 400-425 rwhp.
LS1 Engine,Patriot LS6 Heads, Comp Cam 224/224 .581 lift cam,headers,Ported Fast 90mm Intake & Throttle Body,stock 28lbs injectors,Stock 3.27 rearend,Stock 4L60E Trans.
Looking for strip converter for best et in quarter mile.
Car is used mainly at the track. Not a daily driver. Minor street use - just to and from track and local car shows.
#2
TECH Senior Member
iTrader: (5)
Lots of great sponsors here that make great converters. Look into Circle D, Yank, FTI converters.
Go with atleast a 3600 stall. Good all around size. Since its not your daily driver, consider stepping up to a 4000 stall.
FYI, I have a vigilante 3200 stall. I have a Circle D 5C 4000-4200 stall ready to replace it.
Go with atleast a 3600 stall. Good all around size. Since its not your daily driver, consider stepping up to a 4000 stall.
FYI, I have a vigilante 3200 stall. I have a Circle D 5C 4000-4200 stall ready to replace it.
#4
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,240
Likes: 0
Received 79 Likes
on
70 Posts
SS4k all day...... Check out a few of my vids with basically cam/bolts ons/full weight.
https://ls1tech.com/forums/multimedi...pics-vids.html
https://ls1tech.com/forums/multimedi...pics-vids.html
#6
FormerVendor
iTrader: (21)
We have a 4000 stall we do that is absolutely fabulous at the track. It is our 245mm 2E. It is a little loose down low to help with staging and is very efficient up top. Would love to go over your setup and needs to make sure we are matching a converter with your combo. Just shoot me an Ask Chris or give me a call at the shop.
Chris
Chris