trans brake not working
Whining is indicative of low fluid level or a plugged filter.
Check the fluid level and condition. If it's OK you may need to drop the pan and look for debris, filter condition, and check the pickup tube for cracks, be sure it has (preferably) 2 orings in the case end.
If you ran it low on fluid, it likely needs a rebuild.
Check the fluid level and condition. If it's OK you may need to drop the pan and look for debris, filter condition, and check the pickup tube for cracks, be sure it has (preferably) 2 orings in the case end.
If you ran it low on fluid, it likely needs a rebuild.
Trending Topics
right after the t brake was wired is when the whinning noise came. im assuming it may of had low pressure when whinning and is why it didnt work.
FTI, the manufacture, said to pull the selonoid out and remove the o ring seal on the selonoid and then try it out. I forgot why they said to do this, but i will try this after i fix the trans.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
