Nobody.

I was told this converter fits an LS fbody 4L60e but I'm not sure. See pics & please let me know... Thanks!

07NBSChevy

iTrader: (1)

who makes it? You cant really say unless you can contact the manufacture or do some measuring.

Nobody.

That's the thing... I was hoping someone could ID the numbers on it. I haven't had any luck so far.

I can certainly measure it every way possible. What dimensions am I looking for?

FTICONVERTERS

iTrader: (3)

Not sure on the make but it looks to be built for an LS from what I see.

Looks like a decent bit of pump wear on the hub though, are there deep marks around that area?

Nobody.

Thanks for the reply. No abnormal wear from what I can see and feel. I was told it was a 3600 but just want to find some info before trying it in my 01 Formula.

01ssreda4

iTrader: (96)

Edge Racing

FTICONVERTERS

iTrader: (3)

3600 is believable as its a negative blade angle pump.

These types of converters have fairly small lock-up clutches as well, make sure you disable any PWM if you have it.

Nobody.

The car is basically stock with 3.42 gears. I plan to cam it soon hince the need for the converter change. The Trans was recently rebuilt before I bought the car & it shifts really firm on each gear but no idea about disabling the PWM. How to check?

FTICONVERTERS

iTrader: (3)

Check with the transmission builder if you can, 01' is a PWM unit so you should have it but it may have been modded as well.