OFFICIAL "I want a B&M or Hurst RATCHET SHIFTER for my '98 and above F-Body" Thread
#1
Moderator
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Remember this one?
![](http://www.bmracing.com/media/products/items/8_full.jpg)
What F-Body enthusiast with an Automatic Trans didn't have one or something like it?
WE WANT ONE for the '98 and above F-Body, NOW!!!
https://ls1tech.com/forums/automatic-transmission/251840-true-hurst-has-ratchet-shifter-a4.html
Please sign on if you would get a ratchet shifter designed to fit the console of your '98 and above F-Body. Perhaps we can get B&M or Hurst's attention on this important money-making opportunity!
Thanks!
![](http://www.bmracing.com/media/products/items/8_full.jpg)
What F-Body enthusiast with an Automatic Trans didn't have one or something like it?
WE WANT ONE for the '98 and above F-Body, NOW!!!
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
https://ls1tech.com/forums/automatic-transmission/251840-true-hurst-has-ratchet-shifter-a4.html
Please sign on if you would get a ratchet shifter designed to fit the console of your '98 and above F-Body. Perhaps we can get B&M or Hurst's attention on this important money-making opportunity!
![Driving](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_driving3.gif)
Thanks!
#3
12 Second Club
iTrader: (13)
Join Date: Nov 2001
Location: San Diego, CA
Posts: 1,898
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I've always wanted one, but stayed away from the unreasonably long adaptors and such.
I want a nice stock bolt-in replacement with a chrome T-handle. I would like one that uses the factory console.
Can't be too hard to develop, they have (many) units that fit the 700R4 - just take away the clunky rubber boot and housing and change the damn shift pattern - and provisions for the safety switch and the reverse lights !
...even just a **** replacement (chrome T-handle) that fits on the stock shifter would be adequate - ANYTHING PLEASE HELP US !!!
I'll buy two if you make them.![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Bad30th
I want a nice stock bolt-in replacement with a chrome T-handle. I would like one that uses the factory console.
Can't be too hard to develop, they have (many) units that fit the 700R4 - just take away the clunky rubber boot and housing and change the damn shift pattern - and provisions for the safety switch and the reverse lights !
...even just a **** replacement (chrome T-handle) that fits on the stock shifter would be adequate - ANYTHING PLEASE HELP US !!!
![The Judge](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_judge.gif)
I'll buy two if you make them.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Bad30th
Last edited by Bad30th; 12-23-2004 at 03:10 PM.
Trending Topics
#13
TECH Apprentice
Join Date: Jan 2002
Location: Murphy, TX
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by LS1FIRE
B&M makes a pistol grip shifter that will probaly fit our cars. I woudlnt mine having one if they wernt so expensive
![Supergay](https://ls1tech.com/forums/images/smilies2/supergay.gif)
#17
On The Tree
Join Date: May 2004
Location: Orlando, FL
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yea, I would like to see one made availble but don't care for that Rubber boot thing like in the first PIC. To aftermarketee and cheap looking.
What would be nice would to have something like the old dual gate's in the early Birds and older GTO's. The console had an "h" slit in the center console and one could hit the chrome fliper plate to access the to allow the shifter to slide over to the right in the Manual shift pattern or click the chrome plate back into postion and lock out the speed shift part. It worked very cool and had a very nice quality apperance...
Maybe someone knows what I'm talking about and will post up a PIC of one for all to see.
What would be nice would to have something like the old dual gate's in the early Birds and older GTO's. The console had an "h" slit in the center console and one could hit the chrome fliper plate to access the to allow the shifter to slide over to the right in the Manual shift pattern or click the chrome plate back into postion and lock out the speed shift part. It worked very cool and had a very nice quality apperance...
Maybe someone knows what I'm talking about and will post up a PIC of one for all to see.
#18
Moderator
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Funny. I always thought the rubber boot was a slick way to hid the mating of the shifter to the console and made it look more stock. To me, to make a base for it that works makes it look MORE non-stock.
But, it doesn't matter to me. As long as it is plug-n-play installation and doesn't stick out like a sore thumb, I would still buy it. It must look like it belongs there.
But, it doesn't matter to me. As long as it is plug-n-play installation and doesn't stick out like a sore thumb, I would still buy it. It must look like it belongs there.