I am in need of one of these for my M6/glide conversion but can't find anyone who sells them. BMR has one for the LS1 but it is TH400 only and they have one for the LT1 that fits the Powerglide. Anyone know where to get one or am I going to have to have one custom made....?

Thanks!

 

You are going to have to make one, nobody makes one at this time. If you have a normal auto crossmember, you can just weld an extension plate on it to make a glide work

 

www.wolferacecraft.com


They have one for sale for our cars.

 

The description says that they are good for the 93-97 f-bods. I'll email them to see if them make one for the LS1.....

 

That doesn't look like it will work for an LS1's mounting points.

 

i was thinking about doing the same thing,,how much does your car weight that you are going with a power glide?

 

Not sure, car isn't done yet but we are shooting for around 3200 or less....

 

thats what i was thinking,, the cars has to weight that or less for a power glide,, has anyone driven with a powerglide on the street,, how is it driving it?

 

Matt Harlan has a Glide in his and drives it on the street occasionally. I don't think it would be THAT bad as long as you don't do too much fast freeway driving. I wonder what Harlan did about his crossmember...

 

does anyone know matt? maybe someone can find out from him,, im in need of one too,, i wanted to go with a 4l80e, but thats alot heavier, and if i can drive the car with the power, then thats what im going with,, the only place ill drive it is to and from the race,, its not a everyday car anyway..