Turbo400 Swap, What To Do About Ses Codes?
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Feb 2002
Location: Smyrna, TN
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Turbo400 Swap, What To Do About Ses Codes?
Just Did A Turbo400 Swap In A 97 Ss That Originally Had A 4l60e In It And I Can Only Turn Off 3 Out Of 8 Dtc's That Are Coming On. Just Want To Know What You Guys Have Been Doing About That? Much Thanks!
#2
9 Second Club
iTrader: (2)
Join Date: Jul 2002
Location: on the dyno tuning in MD
Posts: 2,583
Likes: 0
Received 1 Like
on
1 Post
I just used LS1Edit and turned off every single tranny check and I have no SES light. I have driven the car around a good bit and none have come in. I had seven codes to start with, but one was turned off already - so I would have had eight as well.
#3
On The Tree
Thread Starter
iTrader: (2)
Join Date: Feb 2002
Location: Smyrna, TN
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BLK02WS6
I just used LS1Edit and turned off every single tranny check and I have no SES light. I have driven the car around a good bit and none have come in. I had seven codes to start with, but one was turned off already - so I would have had eight as well.
Thanks for the info, I guess it's just the difference between LS1edit and LT1 edit. I'll try to deal with it.