which 4l80 flexplate?
#41
Originally Posted by NA$TY-TA
So that means the Trans is in??? Pic's man pic's.... you know better then that....
these two are the clearance for the main wiring plug and the trans line
http://www.richmondperformancemuscle...ture18431.aspx
http://www.richmondperformancemuscle...ture18432.aspx
these are my shifter situation
http://www.richmondperformancemuscle...ture18434.aspx
http://www.richmondperformancemuscle...ture18436.aspx
these are the flexplate installed and the trans not installed
http://www.richmondperformancemuscle...ture17900.aspx
http://www.richmondperformancemuscle...ture17224.aspx
#43
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Here is mine. Your going in exactly the right direction on the shifter setup. I just welded a perfect plate to cover the hole. Then I just drilled a hole my reverse lights and TC lockup for street use. Here is a kinda far away pic. My car is at my shop waiting on a new tensioner.
Here are some SHITTY pics of the converter and trans. I took the cover off to show you. These are old and sorry I took so long. Your looks really good MM. Good luck with it.
Fixed my leaky valve cover allready Made a mess!
Here are some SHITTY pics of the converter and trans. I took the cover off to show you. These are old and sorry I took so long. Your looks really good MM. Good luck with it.
Fixed my leaky valve cover allready Made a mess!
#45
forgot this pic, as good as it looks, ive allready cut off the quicksilver handle in favor of a factory 6 speed handle.. no pics of that yet
nasty, i have the moroso pan, a rossler trans brake, and the upgraded drum and input shaft, i didnt have a core charge, and the price was extremely reasonable from transformance
oh and i run a hughes dipstick set up cuz it was the cheapest available and i bent the top over with a torch to clear the cowl.
nasty, i have the moroso pan, a rossler trans brake, and the upgraded drum and input shaft, i didnt have a core charge, and the price was extremely reasonable from transformance
oh and i run a hughes dipstick set up cuz it was the cheapest available and i bent the top over with a torch to clear the cowl.
#46
TECH Senior Member
iTrader: (21)
Originally Posted by MIGHTYMOUSE
forgot this pic, as good as it looks, ive allready cut off the quicksilver handle in favor of a factory 6 speed handle.. no pics of that yet
nasty, i have the moroso pan, a rossler trans brake, and the upgraded drum and input shaft, i didnt have a core charge, and the price was extremely reasonable from transformance
oh and i run a hughes dipstick set up cuz it was the cheapest available and i bent the top over with a torch to clear the cowl.
nasty, i have the moroso pan, a rossler trans brake, and the upgraded drum and input shaft, i didnt have a core charge, and the price was extremely reasonable from transformance
oh and i run a hughes dipstick set up cuz it was the cheapest available and i bent the top over with a torch to clear the cowl.
PM me what ya got into to alltogeather please.....$$ wise.
Thanks
Kyle