Big Stuff 3 & 4L80E
Thread Starter
Staging Lane
Joined: Dec 2006
Posts: 62
Likes: 0
From: MS
Big Stuff 3 & 4L80E Any one useing a Big Stuff 3 to control a 4L80E?
I have a BS3 with the tranny option, I haven't installed it yet just looking
for some input from some one that's "been there done that".
Thanks
Chris
I have a BS3 with the tranny option, I haven't installed it yet just looking
for some input from some one that's "been there done that".
Thanks
Chris
i have it all set up in the car, but havent started using it yet. looking for mike brown runs/ran it in his CE
i have a vacuum modulator so i will not be adjusting line pressure with mine, just shift points.
i have a vacuum modulator so i will not be adjusting line pressure with mine, just shift points.
Thread Starter
Staging Lane
Joined: Dec 2006
Posts: 62
Likes: 0
From: MS
I’ve looked at the screen for the trany setting and can’t really make heads or tails of it.
I guess when I get it up and running I can play with it to see what all the settings change
and how the trany responds.
I guess when I get it up and running I can play with it to see what all the settings change
and how the trany responds.
im with you, but before start up im going to make sure i have a stock shiftpoint file in there from john m. so i know it wont do anything crazy and move stuff around from there.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Currently I have a BS3 running a turbo charged windsor engine. I'm going to have it swapped to run Coil on plugs and the tranny.
I have a FAST TCU running the AODE at the moment. It works pretty well.
I've been wanting know how well it's working with the 4L80E. I'd love the data logging capabilities of having the TCU combined with the BS3.
I have a FAST TCU running the AODE at the moment. It works pretty well.
I've been wanting know how well it's working with the 4L80E. I'd love the data logging capabilities of having the TCU combined with the BS3.
Last edited by zboss86; Mar 27, 2007 at 08:16 PM.