looking for a ratchet shifter in a 4l60e
#21
Pontiacerator
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have not been asked to do an aftermarket shifter in a 4th gen car yet. But... the way to go is to begin with a Manual Console and then customize the boot if necessary. I could be wrong so feel free to kick it around. I am sure we'll do one very soon. So stay tuned. Just as soon as I get something worth while done I'll get some pics up. g
I'd like to see something that would work with the stock console, but if I had to go with an M6 console top, I'd do it.
#27
TECH Fanatic
iTrader: (3)
Join Date: Aug 2004
Location: holding down the couch
Posts: 1,458
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Another option is this Hurst....(not ratchet style however) Shifter
You have to modify the console a little bit but, not too bad.
![](http://i19.photobucket.com/albums/b176/ssracer8/DSCN0293.jpg)
You have to modify the console a little bit but, not too bad.
![](http://i19.photobucket.com/albums/b176/ssracer8/DSCN0293.jpg)
#29
10 Second Club
iTrader: (5)
Join Date: Jul 2007
Location: St. Paul, MN
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
There is not much else to say about it, I just bought the shifter from summit and removed the old one to make new one fit. I had to trim the oblong slot in the console so the new shifter would have full stroke. I also had to use part of the stock shifter bracket to help elevate the new one. I will try to get some better pics to show you. As far as part numbers go, this is all I have to show for a link. LINK