just got my th400 almost in...

Reply Subscribe

Thread Tools

Search this Thread

Oct 11, 2007 | 10:28 PM

ls1sleeper

Thread Starter

Staging Lane

iTrader: (6)

Joined: Sep 2007

Posts: 71

Likes: 0

just got my th400 almost in...

only got 4 bolts in bellhousing think this is safe????

cant wait till its done!!!!!!!!!!!!!!!!!

Oct 11, 2007 | 11:04 PM

98turbls1

TECH Fanatic

iTrader: (17)

Joined: Nov 2005

Posts: 1,927

Likes: 2

From: Central Oklahoma

You need to put one more in... It's gonna be the one to the 2 o'clock from the top left bolt... To put that one in you need to get a long extension (like 2 1/2 feet or longer) and no universal joint... That one goes in pretty easy once you get it started...

Good luck.. What else are you going with??? What kind of converter??

Oct 12, 2007 | 12:18 AM

ls1sleeper

Thread Starter

Staging Lane

iTrader: (6)

Joined: Sep 2007

Posts: 71

Likes: 0

i have the yank crossmember with t/a an yank 3600 stall cant wait till its done alls i need is a drive shaft an im using my stock shifter so the guy is going to modify it with the rmvb

Oct 12, 2007 | 12:19 AM

ls1sleeper

Thread Starter

Staging Lane

iTrader: (6)

Joined: Sep 2007

Posts: 71

Likes: 0

its going to be the 2 oclock bolt or 10 oclock???

Oct 12, 2007 | 02:31 PM

8a8mfh

Banned

iTrader: (3)

Joined: Feb 2006

Posts: 1,943

Likes: 0

Quote:

Originally Posted by ls1sleeper

its going to be the 2 oclock bolt or 10 oclock???

It's going to be in the 10 o'clock position, there is no hole in the block at the 2 o'clock.

Oct 12, 2007 | 04:38 PM

BTLFEDSS

TECH Fanatic

iTrader: (12)

Joined: Feb 2004

Posts: 1,600

Likes: 0

From: Mass

Quote:

Originally Posted by 8a8mfh

It's going to be in the 10 o'clock position, there is no hole in the block at the 2 o'clock.

Yup, the 10 o'clock position
BTLFEDSS

Oct 12, 2007 | 07:22 PM

98turbls1

TECH Fanatic

iTrader: (17)

Joined: Nov 2005

Posts: 1,927

Likes: 2

From: Central Oklahoma

Quote:

Originally Posted by ls1sleeper

its going to be the 2 oclock bolt or 10 oclock???

Yes it's the 10 o'clock from the center of the flexplate... I was talking about 2 o'clock from the top left bolt right about the dowel pin... Either way we're talking about the exact same bolt hole... Did you get it in yet??